Window and Door Items on a Minnesota Home Inspection Report
Send the inspection page (PDF is fine) and a photo of each flagged window or door.
Reply within one business day. Or call / text 763-250-3621.
A home inspection failed window seal is a fogged glass unit: the edge seal let moist air between the panes. It is a comfort and looks item, not a safety one, and the window still opens and locks. Egress in a basement bedroom, soft sill or jamb rot and a door that will not latch weigh more. JMB Builders reads each line on the report and says replace or leave, priced per opening.
- Priced per opening
- Six common report lines, replace or leave
- MN Lic. BC809005

An inspection report is written to cover everything. Windows and doors show up on almost every one, and the wording is the same from house to house: failed seal, egress not met, soft sill, door does not latch, tempering not found, flashing not visible. Some matter before closing. Some are a note for later. The report rarely says which.
We take the report one line at a time and sort each window or door into replace now, replace later, or leave it. A fogged unit with a sound frame can wait if the price is right. A basement room sold as a bedroom without an escape opening cannot. Rot in a sill or jamb bottom gets checked with a pick, because paint hides how far it goes. A door that will not latch is usually a frame that moved.
Minnesota adopts the International Residential Code with its own changes in Minnesota Rules chapter 1309. In plain terms, a sleeping room needs at least one emergency escape opening, a basement sleeping room needs its own, and a new bedroom made in an existing basement needs one too. The code also calls for safety glass in spots such as next to a door or over a tub. How a city applies that to an older house is up to its building department. This is not legal advice — ask your agent or an attorney about the purchase agreement.
When a re-inspection comes, the inspector or the buyer's agent looks for the item closed out: the new window or door in place, operating and sealed, the label on the glass where tempering was the issue, a permit card when the job needed one, and the invoice. We leave photos and an itemized invoice by opening.
Hail or wind damage? Start with the 10-minute window and door check. · How a storm claim works with us
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-250-3621.
What you supply
- The inspection report page or pages with the window and door items (PDF is fine)
- A photo of each flagged window or door, inside and outside
- Your closing date and whether the repair is a seller credit or a seller repair
- Which rooms are sold or used as bedrooms, basement included
- Access to the house, or the listing agent's lockbox arrangement
What JMB supplies
- A read of each window and door line on the report, with replace, replace later or leave next to it
- A pick test on soft sills and jamb bottoms to find where the rot stops
- Clear opening and sill height measured on any bedroom window flagged for egress
- An itemized quote by opening, so a seller credit or repair addendum can name each item
- New windows or prehung doors installed with sill pans, flashing tape and sealant
- The permit pulled when the job needs one
- Photos of each finished opening and an itemized invoice for the re-inspection
How it is priced: per opening
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- How many openings on the report actually need replacing
- Insert window into a sound frame, or full-frame where the sill or jamb is rotted
- Rot that runs past the sill into sheathing, rim board or framing
- Egress: a bigger window or casement in the same opening, or a new cut opening and well
- Tempered glass in the new window where it sits next to a door or tub
- Exterior capping, trim and siding patched around the opening
- Closing date: a short window can limit which product lines can arrive in time
Send the inspection page (PDF is fine) and a photo of each flagged window or door, inside and out. We reply within one business day. Or book a free in-home estimate.
How long it takes
Most single windows or doors: half a day to a day once the product is here. Made-to-order windows and doors take weeks to arrive, so tell us the closing date first.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
Fogged or failed seal
Moisture between the panes. The window still works. Leave it if the frame is sound and the deal accounts for it; replace the window when several are fogged, the sash is soft, or the buyer wants it done before move-in.
Egress in a basement bedroom
The room is called a bedroom but the window is too small or too high to climb out. Leaving it means it is not a bedroom. The fix is a larger window or casement in the same opening, or a cut opening with a well.
Soft sill or jamb rot
Paint hides it. If the pick goes in at the corners only, a door jamb bottom can be cut out and new wood spliced in. A window sill soft across its length usually means a full-frame window and new flashing.
Door won't latch or racked frame
The latch misses because the frame moved. Look for rot at the jamb bottom, a sunk threshold or a sagging header. A racked frame with rot is a new prehung door set plumb on a sill pan.
Tempered glass near a door or tub
The inspector found no tempering mark on glass in a spot the code treats as a hazard. The answer is a new window with tempered glass, ordered that way and labeled, so the next inspector can see the mark.
Missing flashing or caulk
Cracked caulk alone is a small item a seller often handles. Flashing that is missing, with stains or soft wood under the window, means the window comes out and goes back with a sill pan and flashing tape, or a new one does.
For inspectors and agents
Send us the report line and the photo you took. We confirm the finding or tell you it looks minor from the photos, and say what it would take to close it. Use the Referring a client option on the form.
Window and Door Items on a Minnesota Home Inspection Report: questions, answered
Does a failed window seal have to be fixed before closing?
No rule makes a fogged window a closing item. A failed seal means moist air got between the panes, so the glass looks cloudy and insulates a bit less, but the window still opens, closes and locks. Whether it gets fixed is part of the deal between buyer and seller: a repair, a credit, or nothing. If several windows are fogged or the sash is soft, replacing them usually makes more sense than arguing over one pane. Ask your agent what the purchase agreement says.
What does 'egress non-compliant' mean?
It means the inspector thinks a bedroom window is too small, opens too little, or sits too high to climb out of in a fire. Minnesota's residential code calls for at least one emergency escape opening in a sleeping room, and a basement bedroom needs its own. In a basement it often means the room should not be sold as a bedroom until the window is fixed. We measure the clear opening and sill height and tell you whether a casement in the same opening gets there or the opening has to be cut bigger.
Is a soft window sill a big repair?
It depends on how far the rot goes. A soft spot at one corner of the exterior sill can stop at the surface. A sill soft along its length usually means water has been getting under the window for years, and the rot can run into the jamb, the sheathing and the framing below. We check it with a pick before quoting. A long soft sill usually means a full-frame replacement with a sill pan, plus whatever framing is wet under it.
Should the seller or buyer replace the windows?
That is a negotiation, not a building question. A seller can replace them before closing, give a credit, or sell as-is, and the buyer can replace them after moving in. A seller repair gets done on the seller's schedule and budget; a credit lets the buyer choose the windows. We quote either way, itemized by opening, so both sides are pricing the same list. This is not legal advice — ask your agent or an attorney about the repair addendum.
Can you quote from the inspection report?
Yes, as a start. Send the report page with the window and door items and a photo of each flagged opening, inside and out. We reply within one business day with what we can tell from those, and what has to be measured or checked in person. Rot and egress usually need a visit. Or book a free in-home estimate and we read the report with you at the house.
How fast can you look?
Photos get a reply within one business day. An in-home visit is booked on the next opening in the schedule, and we fit it to your inspection response deadline when we can. Tell us the closing date when you send the report. Most windows and doors are made to order and take weeks to arrive, so a short closing often ends in a credit rather than a finished repair.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Whole house, several, or just one
Send photos and we reply within one business day, or book a free in-home estimate.
Related jobs we do
Home Inspection Repair List — Contractor Before Closing
The buyer's inspection came back with a list, the repair addendum is signed, and closing is three weeks out.
Read moreDoes a Replacement Bedroom Window Have to Be Egress? Sizes Explained
You are replacing the windows in a bedroom and want to know whether the new ones have to meet egress, and which style gets you there without cutting the wall.
Read moreRotted Door Jamb Bottom — Repair the Frame or Replace the Door?
The paint at the bottom of the door frame is bubbling, a key sinks into the wood, and the weatherstrip has nothing left to hold it. Here is how to tell whether the door has to go, and what replacing it involves.
Read moreReplace Windows After Buying a House — Before or Right After Move-In
You just bought the house and the inspection report says the windows are done. Here is how to time the replacement around closing and move-in.
Read moreSigns You Need New Windows — A Room-by-Room Checklist
One window fogged last winter, the bedroom one won't lock, and the kitchen sill is soft. You want to know if it is time.
Read moreEgress Window Installation — Basement Opening Cut, Window and Well
A basement bedroom needs a way out. We cut the wall, set the window and the well, and finish the inside so the room is legal and usable.
Read morePage reviewed November 22, 2026 · JMB Builders LLC, MN license BC809005 · All windows pages
Where we work
Window Replacement & Installation near you
Based in Zimmerman, scheduling across the Twin Cities metro. A few of the towns we cover: