Window and Door Installation, Labor Only — You Bought Them, We Install
Send the product page or receipt and a photo of each opening. We reply within one business day — before you order, if you like.
Reply within one business day. Or call / text 763-250-3621.
Installation-only window service means you buy the windows or doors and JMB Builders installs them, priced per opening. We take out the old unit, check the rough opening, set the new one plumb, level and square, flash it, foam it, and trim it inside and out as quoted. Windows, entry doors, patio doors and storm doors from Home Depot, Menards, Lowe's, a lumberyard or a dealer. Licensed MN contractor BC809005.
- Priced per opening, labor only, any brand
- Windows, entry, patio and storm doors
- MN Lic. BC809005

This is the start page for everything we install that you bought yourself: windows, entry doors, patio doors and storm doors. Bought at a store, a lumberyard, online or from a dealer. You pick the product and pay the store. We take out the old unit, set the new one, and finish it inside and out. The brand pages below each cover one product line; this page covers how the work runs for all of them.
Most labor-only jobs that go wrong go wrong at the order, not the install. An insert ordered for an opening that needs a full-frame unit. A size taken off the old sash instead of the frame. A jamb made for a 2x4 wall going into a 2x6 wall. A door with the hinges on the wrong side. So we check the order from your photos before you buy: size, rough opening, jamb depth and swing. If something does not add up, you hear it before you pay, not when the truck shows up.
On install day the old window or door comes out and the opening gets cleaned and checked for rot. Sill pan or sill flashing goes in. The new unit is set plumb, level and square on shims and fastened the way the maker's instructions say. Flashing tape is lapped so water runs out, not in. Low-expansion foam fills the gap. Outside is sealed and trimmed to match the siding. Inside gets casing, stool or drywall returns as quoted. Old units, packaging and debris leave with us.
You supply the product, delivered to the house, with its screens, hardware and instructions in the box. Some jobs need parts the store sells separately, like a jamb extension or a trim kit. We tell you which from the photos. Rot or framing damage found once the old unit is out is shown to you and priced before we fix it. Painting is quoted as a separate line — or leave it primed and caulked and paint it yourself.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-250-3621.
What you supply
- The windows or doors, delivered to the house, screens and hardware in the box
- The product page, order confirmation or receipt for each unit
- A photo of each opening inside and out, plus one wide shot of that wall
- Frame width and height inside the jambs, if you can measure them
- Any extras the store sells separately and the order check calls for: jamb extensions, trim kits, sill extensions
- Clear access to each opening inside and out on install day
- Paint or stain for the new trim, if you are finishing it yourself
What JMB supplies
- A check of your order from the photos before you buy: size, rough opening, jamb depth, swing or handing
- Removal of the old window, door or storm door
- Haul-away of old units, glass, packaging and job debris
- Sill pan or sill flashing, flashing tape, low-expansion foam, shims and fasteners
- Setting each unit plumb, level and square and fastening it per the maker's instructions
- Exterior sealant and trim, capping or J-channel as the siding calls for
- Interior casing, stool or drywall returns as quoted, primed and caulked
- Hardware, screens, closers and weatherstrip installed and adjusted
- Painting or staining of new trim when you want it, quoted as its own line
- Photos of the finished openings in your job folder
How it is priced: per opening
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Unit type: replacement insert, new-construction window, prehung entry door, patio door or storm door
- Siding at the opening: vinyl, lap siding, steel, stucco or brick, which sets how the outside is opened and closed
- Size and floor: a second-story unit or a large patio door takes two people and a ladder plan
- Interior finish: existing trim reused, new casing and stool, or drywall returns
- Rot or framing repair found once the old unit is out, priced when we see it
- Number of openings done in the same visit
Send the product page or receipt and a photo of each opening, inside and out. We reply within one business day — before you order, if you like. Or book a free in-home estimate.
How long it takes
Replacement insert windows: several in a day. New-construction windows and entry or patio doors: about one to three openings a day, depending on the siding. Storm doors: a few hours each.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
Windows you bought
Replacement inserts or new-construction units from a store, lumberyard or dealer. Options such as Andersen 100 and 400 series, MI, Silver Line and Ply Gem each have their own page.
Entry doors
Prehung steel or fiberglass entry doors, with or without sidelites. Options such as Therma-Tru, ProVia and Masonite. We check the swing, jamb depth and rough opening before you order, then set the sill on a pan, shim the hinge side and adjust the strike.
Patio doors
Sliding and hinged patio doors. The sill has to be dead level or the door drags and leaks. We check the opening width and height, which panel moves or swings, and the floor height inside before you buy.
Storm doors
Full-view or ventilating storm doors from a store, options such as Larson or Andersen. We check the brickmould width and which side the hinges go on, then hang it, set the closer and sweep, and adjust the latch.
Basement windows
Hopper or slider basement windows from Menards or another store, set in a block or poured wall opening or in a wood buck. The page on Menards basement windows covers what to measure and which unit fits.
Order check before you buy
Send the cart, quote or product page with a photo of each opening. We go line by line: insert or full-frame, size, jamb depth, swing or handing, and tempered glass where the location calls for it. A cart is easy to fix; install day is not.
Window and Door Installation, Labor Only — You Bought Them, We Install: questions, answered
Will you install windows I bought myself?
Yes. Windows and doors you bought at Home Depot, Menards, Lowe's, a lumberyard, online or from a dealer are what this page is about. You pay the store for the product; we quote the labor per opening. We take out the old unit, check the opening, set the new one plumb, level and square, flash it, foam it and trim it as quoted. What we ask is to see the order before you buy, so the size, type and jamb depth match the opening.
Can you check my order before I buy?
Yes, and we would rather do it then. Send the cart, store quote or product page with a photo of each opening inside and out, and the frame width and height if you have them. We check whether it should be an insert or a full-frame unit, the size, the rough opening, the jamb depth for your wall, and the swing or handing on doors, casements and sliders. If something looks off, you hear it before you pay, when a change is still easy.
What if the window is the wrong size?
It depends which way it is off. A unit a little small can sometimes be set with a filler or a built-out frame and trimmed to cover the gap, if it is still square and weathertight that way. A unit too big will not go in without cutting the framing, and that is a different job. Many stores will not take back a special-order unit, so the return question is between you and the store. That is why we check the order before you buy.
Do you haul away the old windows?
Yes. Taking out the old window or door and hauling it away is part of the labor-only quote. That includes the old frame, sash and glass, the old storm door if one comes off, the packaging from the new units, and the trim and caulk we pull. If you want to keep an old unit, for a garage or a cabin, say so and we set it aside instead.
Is trim included?
Trim is included as quoted, and the quote spells it out. Outside, we seal and trim each opening to suit the siding: capping, J-channel or brickmould. Inside, we reuse the existing casing when it comes off clean, or put on new casing and stool, or finish with drywall returns. New trim goes on primed and caulked. Painting is quoted as a separate line — or leave it primed and caulked and paint it yourself.
How do you price labor only?
Per opening. The number moves with the unit type, the siding we open and close, the size and floor, the interior trim, and how many openings we do in one visit. Rot found once the old unit is out is shown to you and priced before we fix it. The brand does not change the labor. Send the product page or receipt and a photo of each opening and we reply within one business day. Or book a free in-home estimate and we measure on site.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Which Windows to Buy for an Installer to Install — Labor Only
You want to buy the windows yourself and hire the labor. Here is what to compare between brands and stores, and what to send us so the order is right the first time.
Read moreAndersen 100 and 400 Series Window Installation, Labor Only
The Andersen order is at the store or stacked on your driveway and the store's install program is weeks out. We set each window the way the printed guide says, on a sill pan, and trim it out inside.
Read moreMI Windows Installation, Labor Only — V4500, V3000 and V2000
You got MI windows through a dealer at a good price, and the dealer does not install or cannot get to you soon.
Read moreProVia Entry Door Installation, Labor Only — Entry and Storm Doors
You ordered a ProVia through a dealer or a lumberyard and it is arriving on a truck. It still has to go in plumb, on a pan, sealed and adjusted, or the door you paid for will not work like one.
Read moreInstall a Basement Window From Menards — Hopper or Slider, Labor Only
The old steel-framed basement window is rusted shut and the vinyl one from Menards is sitting on the workbench. We cut the old frame out, set the new one square in the concrete, seal it and trim it.
Read moreTherma-Tru Door Installation, Labor Only — Fiberglass Entry Doors
You picked the Therma-Tru because it will not dent or rust like the steel door it is replacing. It still has to go in plumb, on a pan, with the sill adjusted right, or the fiberglass does not matter.
Read morePage reviewed November 22, 2026 · JMB Builders LLC, MN license BC809005 · All install what you bought pages
Where we work
Install What You Bought — By Brand & Store near you
Based in Zimmerman, scheduling across the Twin Cities metro. A few of the towns we cover: