Skip to content
JMB Builders logo

How Old Are My Windows? Read the Label for Age, Maker and the Claim

Send one photo of the spacer stamp or label and one of the whole window.

Reply within one business day. Or call / text 763-250-3621.

How old are my windows? Look at the metal or foam spacer between the panes: many sealed glass units have a date code or maker name stamped there. Some makers etch a logo in a glass corner, and a label may sit on the jamb or sash rail. The glass date is close to, not exactly, when the window went in. JMB Builders reads these marks to plan a new sash or a whole new window, priced per opening.

Pair of white double-hung windows with grids, set in an oak-trimmed opening

A window rarely carries a plain birth date. It carries marks, and you read them the way a carpenter reads a grade stamp on a stud. Start with the glass. Many sealed glass units have a date code or maker name stamped on the metal or foam spacer between the panes. Look along the inside edge of the glass, where the panes meet the spacer. Some makers etch a logo in a glass corner instead. Hold a flashlight at an angle. Not every window has a mark, and the codes are not written the same way by every maker.

Then the frame. Look on the jamb, the sash top or bottom rail, or the hardware for a label or name. Open or tilt the sash: some labels sit where you only see them with the window open. The NFRC sticker shows energy ratings and is meant to come off, so you may find only a scrap of it. A scrap with part of a name still helps. One more thing: the glass date is close to, not exactly, when the window went in. The glass is made before the window is built and installed.

Why it matters. Age and maker decide what fix makes sense. We check whether a matching unit or sash is still made. If it is and the frame is sound, a new sash can go in. If it is not, or the frame is worn out, the whole window is replaced. On a retail job, age helps you decide to replace now or wait. On a claim, age can affect how your insurer values the window, and that calculation is the insurer's under your policy. Not legal advice — ask your agent or an attorney.

On a claim, we inspect the windows and doors, photograph and document the damage, write an itemized estimate, and can be there when the adjuster looks at the house. We are a contractor, not a public adjuster. We do not read your policy for you, tell you what it covers, or negotiate your claim. Ask your agent, your adjuster or an attorney. Minnesota law does not let a contractor pay, waive or rebate your insurance deductible, or promise to. We will not, and the deductible is yours to pay.

Send what you have: photos, the adjuster's estimate, your storm date

Send one photo of the spacer stamp or label and one of the whole window. We reply within one business day. Or book a free in-home estimate.

Send what you have: photos, the adjuster's estimate, your storm date

Photos, or one PDF (inspection report, adjuster's estimate, window schedule) (optional)

Up to 3: one wide shot of the area, one close-up of the opening or trim, one of anything you're unsure about.

How do you want your quote?

Used for the written quote. We still reply by text if you picked Text.

How should we reply?
  • Send 2–3 photos and a sentence, or ask for a free in-home estimate.
  • We reply within one business day — by text or email, your choice.
  • You get a written, itemized quote, or we set a time to come out and measure.

We never pay, waive or rebate a deductible — Minnesota law forbids it.

How a quote works →

What you supply

  • A close photo of the spacer stamp, glass etching or label, if you find one
  • A photo of the whole window from inside, sash closed
  • Which rooms and which sides of the house the windows are on
  • Any house paperwork that names the windows: an old invoice or a brand name
  • The claim number and the adjuster's scope, if you filed a claim

What JMB supplies

  • A read of the spacer stamps, etching and labels on each window we look at
  • A check whether a matching unit or sash is still made
  • Notes window by window: maker if we can read it, the glass date, sash and frame condition
  • Photos of each opening and any damage, for you and for your adjuster
  • An itemized estimate: each opening, the unit, the labor, the trim
  • New sash or whole window measured, ordered and installed, with the interior trim reset

How it is priced: per opening

Quoted in writing from your photos, with a reply within one business day. What moves the number:

  • New sash in the old frame, or the whole window
  • Whether a matching unit or sash is still made
  • Style and size: double-hung, casement, slider or picture, and any grilles
  • Insert into the old frame, or full-frame with new interior and exterior trim
  • Second-story access
  • How many openings are done at once

Send one photo of the spacer stamp or label and one of the whole window. We reply within one business day. Or book a free in-home estimate.

How long it takes

Reading the marks takes a few minutes per window. New sashes and windows are made to order, so the wait is the order. Once here, an insert window takes a few hours per opening; full-frame takes longer.

How your project works

  1. 1

    Send photos, get a written quote

    Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.

  2. 2

    Pick materials, or bring your own

    We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.

  3. 3

    Clean, precise installation

    The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.

  4. 4

    Walkthrough and invoice

    We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.

Situations and options

Spacer stamp between the panes

The spacer is the strip that holds the two panes apart at the edge. Many sealed glass units carry a date code or maker name stamped on it. It can be letters, numbers or both. Photograph it straight on, with a flashlight from the side so the stamp shows.

Etched glass corner

Some makers etch a small logo or name in a corner of the glass. It is faint. Check each corner from inside and outside. A tempered pane may carry its own etched mark, which can name the glass maker rather than the window maker.

Jamb, rail or hardware label

Look on the jamb, the sash top or bottom rail, or the hardware for a label or name. Open or tilt the sash first. Locks and cranks sometimes carry a name too.

NFRC sticker leftovers

The NFRC sticker shows energy ratings and is meant to come off, so you may find only a scrap of it. If a corner with a name or number is left, photograph it. On a new window, keep the sticker or a photo of it.

New sash in a sound frame

The frame is solid and square, and a matching sash is still made. The old sash comes out and the new one goes in. We check that the sash is still made before we put it on the estimate.

Whole window replaced

The maker is gone, the sash is not made, or the frame is rotted or out of square. The whole window is replaced, sized to the opening, from options such as MI, Silver Line, Andersen, Ply Gem or ProVia.

What you do, what we do on a claim

How Old Are My Windows? Read the Label for Age, Maker and the Claim: questions, answered

Where is the date on a window?

Many sealed glass units have a date code or maker name stamped on the metal or foam spacer between the panes. Look along the inside edge of the glass, where the panes meet the spacer, with a flashlight held at an angle. Some makers etch a logo in a glass corner instead. Not every window has a date, and makers do not all write the code the same way. The glass date is close to, not exactly, when the window went in.

How can I tell who made my windows?

Start with the glass: a maker name may be stamped on the spacer between the panes or etched in a corner. Then look on the jamb, the sash top or bottom rail, or the hardware for a label or name. Open or tilt the sash to see the sides you normally cannot. The NFRC sticker is meant to come off, so you may find only a scrap of it. Photograph whatever you find, even part of a word, and send it to us.

Does window age matter on an insurance claim?

It can. Age can affect how your insurer values the window, and that calculation is the insurer's under your policy. Our page on actual cash value and replacement cost explains the two ways a policy can pay. We are a contractor, not a public adjuster. We do not read your policy for you, tell you what it covers, or negotiate your claim. We inspect, photograph and document the damage and write an itemized estimate. Not legal advice — ask your agent or an attorney.

What if the maker is out of business?

Then a matching sash may not be made anymore, and the fix is often the whole window. We check whether a matching unit or sash is still made before we write the estimate. If nothing matches, the window is replaced with a new one sized to the opening, from options such as MI, Silver Line, Andersen or JELD-WEN. On a claim, how that is handled is between you and your insurer under your policy. Not legal advice — ask your agent or an attorney.

Can a newer window be fixed instead of replaced?

A newer window from a maker that still makes that line is the best case for a new sash instead of a whole window. If the frame is sound and square and a matching sash is still made, the sash is replaced and the frame stays. If the frame is cracked, rotted or out of square, or the sash is not made, the whole window is replaced. We replace the sash or the whole window; we do not do glass, hardware or parts repair.

What photo should I send?

Two photos per window. One close-up of the spacer stamp, glass etching or label, straight on, with a flashlight from the side so the letters show. One of the whole window from inside, sash closed, so we can see the style, grilles and trim. Leave people and house numbers out of the frame. We reply within one business day. Or book a free in-home estimate and we read the marks in person.

Recent JMB work, from our job log

59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.

Related jobs we do

Page reviewed November 22, 2026 · JMB Builders LLC, MN license BC809005 · All insurance repairs pages

Where we work

Insurance & Storm Damage Repairs near you

Based in Zimmerman, scheduling across the Twin Cities metro. A few of the towns we cover: