Trim Carpenter in Ham Lake, MN
Ham Lake's custom and semi-custom homes have trim a catalog does not match.
Reply within one business day. Or call / text 763-204-2099.
A trim carpenter in Ham Lake, MN installs baseboard, window and door casing and crown, and in the custom homes there, matches wide or stain-grade trim that no store carries. JMB Builders does trim in Ham Lake ramblers, walkouts and custom houses: coped inside corners, base scribed to the floor. Baseboard is priced per linear foot and casing per opening, quoted from photos.
- Base per linear foot, casing per opening
- Wide and stain-grade profiles matched
- Coped corners, scribed to the floor
Ham Lake is acreage and custom homes, from 1970s ramblers and walkouts to houses built to order through the 2000s. Trim work here splits along the same line. In the older ramblers it is the usual job: thin ranch base and casing replaced with something taller, or base redone after new flooring. In the custom houses it is matching. The casing is often wider than stock, the species is oak or something stained to a color the builder mixed, and the crown is a profile nobody stocks now.
Matching starts with a sample. We take an offcut or a piece from inside a closet, find the closest stock profile, and when it is not close enough, mill it or build it up from two pieces. Stain-grade means the species and grain have to match too, so we test the stain on a scrap from the same board before the trim goes up. New base finishing a finished basement in a walkout gets the same treatment so it does not look added later.
Ham Lake rooms run bigger than a standard subdivision house, with taller walls and wider openings, which means longer runs of base and crown with fewer joints to hide. Trim replacement on its own is carpentry. Most cities require a permit for a basement finish that adds walls; we check with the City of Ham Lake building department and pull it when the job calls for one. We have had install work in Ham Lake this year and are often in Blaine and Andover on the same trips.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-204-2099.
What you supply
- A photo of each room from the doorway and close-ups of the existing base, casing and crown
- An offcut or a piece of the old trim if you want an exact match
- Paint-grade or stain-grade, and the stain color if you are matching
- Trim you already bought, with the footage and a photo of the label
- Painting or staining is quoted as a separate line, or leave it primed and caulked and finish it yourself
What JMB supplies
- Base, casing, crown and stool in primed MDF, finger-jointed pine or stain-grade oak and other species
- Profiles matched from stock, milled to match, or built up from two pieces
- Removal and haul-away of the old trim
- Coped inside corners, glued miters, base scribed to the floor
- Jamb extensions, stool and apron at windows that need them
- Stain tested on a scrap before the trim goes up, when staining is on the quote
- Photos of the finished rooms in your job folder
How it is priced: per linear foot
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Linear feet of base and crown and the number of window and door openings
- Stock profile vs. milled or built-up to match the existing trim
- Paint-grade MDF or pine vs. stain-grade oak or another hardwood
- Tall walls and long runs that need staging or longer stock
- Removal of the old trim and repair of the drywall behind it
- Staining or painting, quoted as its own line
A close-up of the trim with a tape across its face, and a count of windows and doors per room, gets you a firm number.
How long it takes
New base after flooring in one room: half a day. A main floor of base and casing: two to three days. Milled or stain-matched trim adds lead time before we start, not days on site.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
1970s rambler trim upgrade
Thin ranch base and casing pulled and replaced with a taller base and a casing with a profile, painted or stained, across the main floor.
Custom trim matched
Wide casing, stain-grade base or an old crown profile matched for an addition, a repair or a room that was never finished. Milled or built up when stock will not do.
Walkout basement trim-out
Base, casing and window returns in a finished walkout, matched to the upstairs so the house reads as one.
Crown in big rooms
Crown run in long lengths in great rooms and vaulted spaces, with scarf joints placed where they will not be seen.
Trim Carpenter in Ham Lake, MN: questions, answered
How much does a trim carpenter cost in Ham Lake?
Baseboard and crown are priced per linear foot and casing per opening. Matching a custom or stain-grade profile costs more than stock trim, and long runs in tall rooms add time. There are no prices on this site; send photos and a room count and we reply within one business day, or book a free in-home estimate.
Can you match the wide casing in my custom-built Ham Lake home?
Usually yes. We bring a piece of the casing to compare against stock profiles, and when nothing lines up we mill it or build it up from two pieces. Send a close-up with a tape measure across the face so we can tell you the route before the estimate.
Can you match the stain on existing oak trim?
We get close by testing on a scrap from the same species before anything goes on the wall. Oak that has aged for twenty or more years has darkened, so the new trim is stained to match the old color, not the original can. Staining is quoted as a separate line.
Do you trim out finished basements in walkouts?
Yes. Base, door casing and window returns in a walkout basement, matched to the main floor. Most cities require a permit when a basement finish adds walls, so we check with the City of Ham Lake building department on that part.
Should I replace the 1970s trim in my rambler or keep it?
If it is solid wood in good shape and you like it, it can stay and be refinished or matched where it is damaged. If it is thin, chipped or a profile you do not like, replacing it with a taller base and casing changes how every room looks.
Do you work near Ham Lake, in Blaine and Andover?
Yes. Ham Lake, Blaine, Andover and Oak Grove are all regular trips from our Zimmerman base. Trim jobs of a day or two are welcome in each of them.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Baseboard & Casing Installation
Straight lines, tight miters, and coped inside corners — baseboard and window & door casing installed room by room or across your whole home.
Read moreCrown Molding Installation
Crisp corners, seamless joints, and profiles that fit your home — crown molding installed by a licensed Minnesota contractor who treats trim as a craft, not an afterthought.
Read moreBasement Finishing Trim Carpenter — Doors, Casing and Baseboard
The drywall is done and the basement is a set of bare openings. We hang the doors and run every stick of trim so the space is ready for paint and carpet.
Read moreInterior Door Installation in Ham Lake, MN
Custom Ham Lake homes have doors that are taller, wider or stained to match oak trim. Replacing one, or all of them, takes fitting rather than a stock swap.
Read moreCustom Built-Ins in Ham Lake, MN
Many Ham Lake custom homes came with built-ins in oak or maple. Adding to them, or building new ones that sit beside them, means matching wood, stain and detail.
Read moreBoard and Batten & Paneled Wainscoting in St. Paul, MN
A Victorian dining room missing its paneling, a bungalow hall that wants a plate rail, or a postwar bedroom that needs one wall with some depth.
Read morePage reviewed October 9, 2026 · JMB Builders LLC, MN license BC809005 · All carpentry by city pages
Where we work
Finish Carpentry by City near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: