Closet Door Casing After Drywall — Jamb, Casing and Closet Doors
The bedroom is painted, but the closet opening is still bare drywall corners or raw studs.
Reply within one business day. Or call / text 763-250-3621.
Closet door casing after drywall is needed when the drywaller wraps the closet opening or leaves it as bare framing: a jamb sized to the wall, shimmed plumb, cased both sides, with the head stop or bifold track added and the bifold, bypass or prehung door hung. JMB Builders does it in homes across the Twin Cities metro. Open closets without a door get a cased opening. Priced per opening, quoted from your photos; reply within one business day.
- Priced per opening, jamb and casing together
- Bifold, bypass, prehung or open cased closet
- Quote from photos, reply within one business day
Closet openings get left behind more than any other doorway. The door package did not include them, the drywaller wrapped the opening with corner bead because nobody told him a jamb was coming, or the closet doors were ordered late. What is left is a rough opening with drywall or bare framing on the sides and a header with no stop. Finishing it means building a jamb, two legs and a head ripped to the wall thickness, setting it plumb and square, then casing it on both faces.
The door type sets the jamb. Bifolds need a head jamb for the track and a jamb width that clears the door when it folds. Bypass doors need a header wide enough for the double track and a fascia to hide it. A prehung swing door brings its own jamb and just needs the opening sized right. An open closet, or a reach-in that will get a curtain, is a cased opening with no stop. We check the rough opening against the door you bought before we cut anything. Painting is quoted as a separate line, or leave it primed and caulked and paint it yourself.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-250-3621.
What you supply
- The closet doors (bifold, bypass or prehung) with their track and hardware, or ask us to price them
- The casing profile if you want it to match the other doors (send a close-up)
- Paint color if we finish it — painting is quoted as a separate line, or paint it yourself
What JMB supplies
- Jamb stock ripped to your wall thickness, primed or stain-grade to match
- Casing on both sides in a standard profile or matched to the room
- Bifold track and pivots, or bypass track and fascia, set level in the head jamb
- Shims, fasteners, glue, fill and caulk
- Cutting drywall or corner bead back where it was wrapped into the opening
- Adjusting the doors so they meet in the middle and clear the carpet
- Photos of the finished closets in your job folder
- Painting of the jamb, casing and doors when you want it, quoted as its own line
How it is priced: per opening
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Number of closet openings in the visit
- Bifold, bypass, prehung or open cased opening
- Drywall-wrapped opening that has to be cut back vs. bare framing
- Rough opening that is out of square or the wrong size for the door
- Standard primed profile vs. matching an existing stain-grade casing
- Whether we supply the doors and hardware
Send a photo of each closet opening straight on and one of the door package label. Tell us the wall thickness if you know it. That is enough for a firm per-opening quote.
How long it takes
One closet opening with jamb, casing and a bifold: a couple of hours. All the closets on a new-build upper floor: one day.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
Bifold closet
A head jamb and two side jambs, the bifold track screwed to the head, pivots and the floor bracket set, and the doors hung and adjusted so they meet in the middle. Casing on both sides.
Bypass closet
A head jamb wide enough for the double track, a fascia board to hide the track from the room, floor guides, and the two doors hung so they slide past each other without rubbing.
Prehung swing door
A standard prehung interior door set in the opening, shimmed at the hinges and strike, cased both sides. Used on walk-in closets and wherever a swing door fits the room.
Open cased closet
A jamb with no stop and casing on both faces, for a closet that stays open, gets a curtain, or is being turned into a nook. The head jamb is finished clean because there is no track to cover it.
Closet Door Casing After Drywall — Jamb, Casing and Closet Doors: questions, answered
The drywaller wrapped my closet opening — can you still put a jamb and casing on it?
Yes. We cut the corner bead and drywall back to the framing on the sides and head, set a wood jamb ripped to the wall thickness, and case both faces. The cut edge of the drywall ends up behind the casing so nothing shows. It takes a little longer than a bare opening but it is the same result.
Do I need a jamb for bifold closet doors?
Yes. The bifold track screws to a head jamb, the pivot bracket sits at the bottom of a side jamb, and the doors close against the jamb faces. Without a jamb the track goes into bare framing and the doors bang on drywall. Some builders skip it on budget homes; it looks unfinished and the doors do not last.
Can you case a closet opening that will not have a door?
Yes. A jamb with no stop and casing on both sides finishes the opening as a clean cased pass-through. It is a common choice for a nursery closet that gets a curtain, a coat closet turned into a bench nook, or a reach-in that stays open. If you add a door later, the jamb is already there.
What size closet door do I buy for my opening?
Measure the rough opening, the framing to framing width and the floor to header height, before you buy. Bifold and bypass door packages list the finished opening they fit, and the jamb takes up some of the rough opening on each side. Send us a photo with a tape across the opening and the door you are looking at, and we will tell you whether it fits before you order.
Can you match the casing on the other doors in the room?
Yes. Send a close-up of the existing casing and we match the profile from stock, or find the closest and tell you how close it is. On stain-grade trim we match the species and let you know the stain is a finish line. New primed casing on painted trim matches after paint, which is quoted separately or done by you.
Do you install the closet doors too, or just the trim?
Both. We set the jamb and casing and hang the bifold, bypass or prehung door in the same visit, with the track, pivots, guides and pulls installed and the doors adjusted to meet evenly and clear the floor. If the doors are not on site yet we can do the jamb and casing first and come back, but one visit is cheaper.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Closet Door Installation — Bifold, Bypass and Mirrored Doors
Closet doors that fall off the track, drag on the carpet or never quite meet in the middle. Replaced with new hardware on a track that is level, by a crew that hangs doors for a living.
Read moreReframe a Closet Opening — Wider Doors or an Open Nook
A narrow closet door you cannot get a bin through, or a closet you would rather have as an open reading nook or shelving wall — we reframe the opening and finish it so it looks original.
Read moreBasement Finishing Trim Carpenter — Doors, Casing and Baseboard
The drywall is done and the basement is a set of bare openings. We hang the doors and run every stick of trim so the space is ready for paint and carpet.
Read moreCloset Shelving Installation — Wood Shelf and Rod
The wire shelf pulled out of the drywall, or the builder left the closet with one sagging shelf and a rod. We build wood shelving that fits the closet and holds what you hang on it.
Read moreBaseboard & Casing Installation
Straight lines, tight miters, and coped inside corners — baseboard and window & door casing installed room by room or across your whole home.
Read moreAttic Hatch Trim — Casing, Painted Panel and Insulated Lid
The scuttle hole with a raw drywall edge and a loose square of drywall dropped on top of it: we case it, build a real lid, seal it and insulate it.
Read morePage reviewed October 1, 2026 · JMB Builders LLC, MN license BC809005 · All finish carpentry pages
Where we work
Finish & Trim Carpentry near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: