Skip to content
JMB Builders logo

Trim Carpenter in Zimmerman, MN

Your Zimmerman house went up when the subdivision did, and the trim is the same flat, narrow stock in every room, with the miters opening a little more each winter.

Reply within one business day. Or call / text 763-204-2099.

A trim carpenter in Zimmerman, MN who is based in town: JMB Builders replaces the thin builder baseboard and casing common in Zimmerman's 1990s and 2000s homes, adds crown in dining and living rooms, and trims out basements and new windows. Inside corners are coped and the base is scribed to the floor. Baseboard is priced per linear foot and casing per opening. Send photos and we reply within one business day, or book a free in-home estimate.

  • Based in Zimmerman, Sherburne County
  • Baseboard per foot, casing per opening
  • Coped corners, base scribed to the floor
Three-window bay with white casing and a bright country view

Zimmerman grew fast through the 1990s and 2000s, and most houses from that run got the same trim package: narrow base, thin flat casing, corners mitered with no glue, all shot up in a day. Twenty-some winters later the miters have opened, the base has pulled off the wall where the floor settled, and caulk is holding the outside corners together.

Replacing it is mostly carpentry, not material. We pull the old base and casing, check walls and floors with a straightedge, and set a taller base scribed to the floor so the top line runs straight even where the subfloor dips. Inside corners get coped, outside corners mitered and glued. Casing goes on with the same reveal at every door and window.

Being based in Zimmerman, a one-room job after new flooring or a dining room of crown is easy to fit into the schedule. We also trim out basement finishes, and windows another company set and left with bare drywall or foam showing at the jamb.

Get a written quote for this job

Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-204-2099.

Photos (optional)

Up to 3: one wide shot of the area, one close-up of the opening or trim, one of anything you're unsure about.

How do you want your quote?

Free, no obligation. Every quote is written and itemized, so you can compare it line by line.

What you supply

  • The base and casing profile you want, or a photo of a room you like
  • Rough room sizes and the number of windows and doors in each
  • Trim you already bought, with the label and the footage
  • Your paint color if we are painting; otherwise it is left primed and caulked

What JMB supplies

  • Primed MDF, finger-jointed pine or stain-grade base, casing and crown
  • Removal and haul-away of the old builder trim
  • Coped inside corners, glued outside miters, base scribed to the floor
  • Jamb extensions, stool and apron where windows need them
  • Finish nails, filler and paintable caulk
  • Painting is quoted as a separate line — or leave it primed and caulked and paint it yourself
  • Photos of the finished rooms in your job folder

How it is priced: per linear foot

Quoted in writing from your photos, with a reply within one business day. What moves the number:

  • Linear feet of base and the number of window and door openings
  • Profile height: a taller base or a built-up casing takes more material and time
  • Crown added in a dining room, living room or primary bedroom
  • Paint-grade MDF or pine vs. stain-grade wood to match existing trim
  • Floors that dip and need the base scribed or a shoe added
  • Old trim to remove and haul away

Send a photo of each room from the doorway, a close-up of the trim at a corner, and a count of doors and windows.

How long it takes

One room of base after new flooring: a few hours. A main floor of base and casing: two to three days. Crown in two rooms adds about a day.

How your project works

  1. 1

    Send photos, get a written quote

    Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.

  2. 2

    Pick materials, or bring your own

    We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.

  3. 3

    Clean, precise installation

    The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.

  4. 4

    Walkthrough and invoice

    We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.

Situations and options

Builder trim swap

Pull the narrow base and flat casing from a 1990s or 2000s house and put in a taller base and a casing with a profile, room by room or the whole main floor.

Crown in the main rooms

Crown in a dining room, living room or primary bedroom, coped at the inside corners and held to a straight line where the ceiling waves.

Basement finish trim

Base, casing and window returns in a finished lower level, often in the same project as an egress window for a new basement bedroom.

Trim-out after window replacement

Casing, jamb extensions, stool and apron on windows that went in with no interior trim, or with trim that does not match the rest of the house.

Trim Carpenter in Zimmerman, MN: questions, answered

Can you replace the trim in my 2000s house without new floors?

Yes. We pull the old base and casing, patch the wall where it sat, and set the new trim to the existing floor. A taller base covers the old paint line, which can save repainting the walls. If new flooring is coming soon, do the floors first and we set the base after.

How do you install crown when the ceiling is not flat?

Ceilings in 1990s and 2000s houses often wave a little where the trusses moved. We set crown to a straight line and fill a small gap at the ceiling with caulk, or float the ceiling where the dip is bigger. Inside corners are coped so they stay tight as the house moves through the seasons.

Do I need a permit for new trim in Zimmerman?

Swapping baseboard, casing and crown in existing rooms is finish work and is usually not a permit item, but rules vary. Most cities require a permit for a basement finish or a new egress window. We check with the City of Zimmerman building department and pull the permit when the job needs one.

Will new trim look odd next to the trim I keep in other rooms?

It can, so we plan it. If you only do part of the house, we either match the existing profile from stock or put the new style in rooms that stand on their own, like a basement or the upstairs. Two profiles in rooms you see from one spot look like a mistake, and we flag that on the quote.

Can you trim out windows another company installed?

Yes. We add jamb extensions to bring the jamb flush with the drywall, then case it and add a stool and apron if you want them. It does not matter who set the windows. Send a photo of each window from inside and we reply within one business day.

Do you do trim work outside Zimmerman?

Yes. Zimmerman is our base, and we do trim work across Sherburne County and the north metro, including Princeton and Otsego, and across the Twin Cities. Send photos for a reply within one business day, or book a free in-home estimate.

Recent JMB work, from our job log

59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.

Related jobs we do

Page reviewed October 9, 2026 · JMB Builders LLC, MN license BC809005 · All carpentry by city pages

Where we work

Finish Carpentry by City near you

Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: