Interior Door Installation in Princeton, MN
Princeton doors that rub, will not latch, or sound hollow, replaced or refit so they swing true and match the rest of the house.
Reply within one business day. Or call / text 763-204-2099.
Interior door installation in Princeton MN depends on the age of the house. In the older in-town homes we usually fit new slabs to the original jambs and keep the stained casing; in the 1990s-and-newer homes we swap hollow-core builder doors for prehung or solid-core units. JMB Builders, based in Zimmerman, hangs each door plumb with even gaps and the latch catching. Priced per door.
- Priced per door, slab or prehung
- Old jambs and casing kept where sound
- Hung plumb, latches with a click
An older Princeton house usually has stained wood doors and casing from when it was built, and the openings have moved over the years. A prehung door would mean tearing out casing that is hard to match. More often we fit a new slab to the old jamb: plane it to the opening, cut the hinge mortises to line up with the old ones, bore the lockset and move the strike so it latches. The original casing stays.
The homes along the highway corridor from the 1990s on were built with hollow-core doors, often the same six-panel style on every opening. The jambs are usually still square, so owners can choose a slab swap to keep the casing, or full prehung units if they want new casing at the same time. Solid-core doors on bedrooms, bathrooms and an office are the most common upgrade there. Basement finishes add a few more doors to the list.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-204-2099.
What you supply
- The doors, prehung or slab, or tell us the style and we put them on the quote
- A photo of each opening and the door sizes or the label if you have bought them
- Knobs, levers and hinges if the doors do not come with them
- Your paint or stain color if we are finishing the doors
What JMB supplies
- Removal and haul-away of the old doors
- Slabs planed, mortised and bored to fit existing jambs
- Prehung units shimmed at the hinges and strike and nailed off
- Casing reused, matched to the original, or new to your choice
- Hardware, stops and strikes set so every door latches
- Painting or staining when you want it, quoted as its own line
- Photos of the finished doors in your job folder
How it is priced: per door
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Slab fit to an old jamb vs. a new prehung unit
- Hollow-core, solid-core, or glass-panel and French doors
- Openings out of square in older homes that need more planing or shimming
- Matching stained casing vs. new paint-grade casing
- How many doors in the same visit
Send a photo of each door from both sides, the count, and the door labels if you bought them. Say which are slab swaps and which are prehung.
How long it takes
Prehung doors in a newer home: two to four a day. Slabs fitted to old jambs: about half a day each. A whole-house swap: two to four days.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Interior Door Installation in Princeton, MN: questions, answered
Can you hang a new door in the old jamb of my Princeton house?
Yes. We fit the slab to the existing jamb by planing the edges, cutting hinge mortises that line up with the old ones, and boring the lockset where the strike sits. The original stained casing stays, so nothing has to be matched. It takes longer per door than a prehung unit, but it keeps the house's millwork intact.
Should I replace hollow-core doors with solid-core in my newer Princeton home?
On bedrooms, bathrooms and an office, most owners say yes: solid-core doors block more sound and feel solid when they close. Closets can stay hollow-core to keep the cost down. If the jambs are square, a slab swap keeps your casing; prehung units bring new jambs and casing.
How much does interior door installation cost in Princeton?
Each door is priced separately, set by slab vs. prehung, the door type and how much fitting the opening needs. Several doors in one visit bring the rate per door down. There are no prices on this site; send photos and we reply within one business day, or book a free in-home estimate.
Do I buy the doors or do you?
Either. Many owners buy doors at a lumberyard or a home center and have us install them; send the sizes and handing before you buy and we check them. Or tell us the style and core and we put the doors and hardware on the quote.
Do you fix doors that stick or will not latch?
Yes. In older homes that is usually a jamb that has shifted or a hinge that has worked loose; in newer homes it is often a strike that never lined up. Most are fixed by resetting hinges, planing or moving the strike, without a new door.
Do you install interior doors in Cambridge and Elk River too?
Yes. We are based in Zimmerman and install interior doors in Cambridge, Elk River, Big Lake and across the north metro. Send photos for a reply within one business day, or book a free in-home estimate.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Interior Door Installation & Replacement
Doors that close with a solid click, swing true, and match throughout the house — bedroom, bathroom, and closet doors installed by a licensed contractor who hangs doors for a living.
Read moreSolid Core Doors for Soundproofing — Quiet Bedroom Door Upgrade
The nursery next to the TV room, the home office on a call while the kids are home, the bedroom over the kitchen. The door is the weak spot in the wall. A solid core door with seals fixes most of it.
Read moreReplace All the Interior Doors in a House — One Style, One Visit
Every door in the house is a different flat-panel from a different decade, half the knobs are brass and the closet doors are missing. One order, one crew, one style everywhere, done in a few days.
Read moreInterior French Door Installation
Two doors that meet in the middle with an even gap, close without a rattle, and stay that way — interior French doors fitted and hung by a licensed Minnesota contractor.
Read moreBoard and Batten & Paneled Wainscoting in St. Paul, MN
A Victorian dining room missing its paneling, a bungalow hall that wants a plate rail, or a postwar bedroom that needs one wall with some depth.
Read moreBoard and Batten & Wainscoting in East Bethel, MN
An East Bethel basement or entry finished by the owner often has straight walls and nothing on them. Board and batten finishes it, painted crisp or in rough pine to suit an acreage house.
Read morePage reviewed October 9, 2026 · JMB Builders LLC, MN license BC809005 · All carpentry by city pages
Where we work
Finish Carpentry by City near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: