Trim Carpenter in Rogers, MN
Most Rogers houses went up from the late 1990s on. The trim job here is clean, square lines on deep walls, not matching a hundred-year-old profile.
Reply within one business day. Or call / text 763-204-2099.
A trim carpenter in Rogers, MN mostly works on newer houses: casing windows that were left as drywall returns, building jamb extensions to the depth of a 2x6 wall, and running baseboard, shoe and crown. JMB Builders, based in Zimmerman, does this work across Rogers. Baseboard and crown are priced per linear foot and casing per opening. Photos sent in get a reply within one business day, or we can measure at a free in-home estimate.
- Base and crown per foot, casing per opening
- Jamb extensions built to 2x6 wall depth
- Primed, filled and caulked; paint is its own line
Rogers is mostly newer construction, and a lot of it was finished on a budget. The common sight is a window with drywall wrapped into the opening and a plastic corner bead, no wood at all. Another is a two-story with thin colonial casing on the main floor and nothing but drywall returns upstairs. Both are fixable without touching the window.
Walls here are usually framed with 2x6, so a window sits deep in the wall. Casing it means building a jamb extension for every opening, ripped to the depth measured at that window, because two openings in the same room are rarely the same. The extension gets set flush with the drywall, then the casing goes on with an even reveal all the way around. That reveal is what your eye reads as straight.
We also do the rest of the trim in these houses: taller base to replace the short builder base, shoe after new LVP, crown in the great room. If you are finishing a lower level in Rogers, or in nearby Maple Grove or Dayton, the same carpenter can trim out the basement once the drywall is primed.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-204-2099.
What you supply
- Photos of each room from the doorway and a close-up of one window and one door as they are now
- The casing and base profile you like, or a photo of a house you want it to look like
- Trim you already bought, if you have it, with the footage and a photo of the label
- Painting or staining is quoted as a separate line — or leave it primed and caulked and paint it yourself
What JMB supplies
- Jamb extensions ripped to each opening's measured depth and set flush with the drywall
- Casing with an even reveal, stool and apron at windows where you want the traditional look
- Baseboard and shoe with coped inside corners, scribed to the floor
- Crown with coped corners and glued outside miters
- Removal and haul-away of the old trim
- Nail holes filled, joints caulked, primed and ready for paint
- Photos of the finished rooms in your job folder
How it is priced: per linear foot
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Number of window and door openings, and how many need jamb extensions
- Wall depth and how far out of square the drywall returns are
- Linear feet of baseboard, shoe and crown
- Profile size, and paint-grade MDF or pine vs. stain-grade wood
- Tall great-room ceilings that need scaffolding for crown
- Old trim to pull and haul away
Send a photo of each room, a close-up of one window, and a count of windows and doors per floor. We measure on site before ordering material.
How long it takes
A room of window casing with jamb extensions: about a day. A full main floor of base, casing and shoe: two to three days. Whole-house trim-outs run longer, set by the opening count.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
Drywall-return windows cased
Jamb extensions built into each drywall opening, then casing, and a stool and apron if you want them. The window stays; only the trim is new.
Builder base swapped for taller base
Short base pulled and replaced with a taller profile, coped at the inside corners, with shoe where the floor dips.
Crown in the great room
One-piece or built-up crown in living rooms and kitchens, run off scaffolding where the ceiling goes up a story.
Basement trim-out
Doors cased, egress windows trimmed and base run on the slab once a lower level is drywalled and primed.
Trim Carpenter in Rogers, MN: questions, answered
Can you add trim to windows that only have drywall returns in Rogers?
Yes. We build a wood jamb extension into the drywall opening, sized to the depth at that window, then case it. The window does not come out and the drywall return stays behind the new wood. Many Rogers homes from the 2000s have these openings, and most get done room by room.
Why do newer Rogers houses need deeper jamb extensions?
Most houses here were framed with 2x6 exterior walls, so the window sits farther back from the drywall face than in an older 2x4 house. Each extension is ripped to the depth measured at that opening. If the depth varies from top to bottom, the extension is tapered so the casing still sits flat.
Do I need a permit to replace trim in Rogers?
Swapping casing, baseboard or crown is finish work, and permits are usually tied to framing, electrical or structural changes instead. If your job moves a wall, widens an opening or adds wiring, we check with the City of Rogers building department and pull the permit when one is needed.
How is trim carpentry priced in Rogers?
Baseboard, shoe and crown are priced per linear foot, and casing per window or door opening. The number moves with the profile, paint-grade or stain-grade material, the number of jamb extensions and ceiling height. Send photos of each room and we reply within one business day, or book a free in-home estimate.
Will you paint the new trim?
We can. New trim goes in with nail holes filled, joints caulked and primed. Painting is quoted as a separate line — or leave it primed and caulked and paint it yourself. Most people in newer homes pick a semi-gloss white to match the doors.
Do you trim out new houses for builders in Rogers?
Yes. Rogers has a lot of new construction and we do trim-outs for homeowners and builders: doors hung, windows cased, base run and closets trimmed. Send the plan or the opening count and the profile list, and we price it per opening and per foot.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Baseboard & Casing Installation
Straight lines, tight miters, and coped inside corners — baseboard and window & door casing installed room by room or across your whole home.
Read moreWindow Trim & Casing for New Construction
Wood jambs and casing added to every window and patio door your builder wrapped in drywall — installed after closing, before or after you move in, by a licensed Minnesota contractor.
Read moreCrown Molding Installation
Crisp corners, seamless joints, and profiles that fit your home — crown molding installed by a licensed Minnesota contractor who treats trim as a craft, not an afterthought.
Read moreBasement Finishing Trim Carpenter — Doors, Casing and Baseboard
The drywall is done and the basement is a set of bare openings. We hang the doors and run every stick of trim so the space is ready for paint and carpet.
Read moreBoard and Batten & Paneled Wainscoting in St. Paul, MN
A Victorian dining room missing its paneling, a bungalow hall that wants a plate rail, or a postwar bedroom that needs one wall with some depth.
Read moreBoard and Batten & Wainscoting in East Bethel, MN
An East Bethel basement or entry finished by the owner often has straight walls and nothing on them. Board and batten finishes it, painted crisp or in rough pine to suit an acreage house.
Read morePage reviewed October 9, 2026 · JMB Builders LLC, MN license BC809005 · All carpentry by city pages
Where we work
Finish Carpentry by City near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: