Trim Carpenter in Brooklyn Park, MN
Dark, dinged trim in a rambler, or a two-story that got new floors and now has gaps under the base: straightforward trim work, priced in writing.
Reply within one business day. Or call / text 763-204-2099.
A trim carpenter in Brooklyn Park, MN usually replaces worn trim throughout a 1960s–70s rambler or a 1980s–90s two-story: new casing and baseboard, often after new flooring, and crown in the living room. JMB Builders keeps it practical, primed MDF or pine, coped corners, base scribed to the floor. Baseboard is priced per linear foot, casing per opening. Send photos and we reply within one business day.
- Baseboard per linear foot, casing per opening
- Primed and caulked, ready for paint
- Often paired with new flooring
Brooklyn Park's housing splits roughly in two. The south side has 1960s and 70s ramblers, often with narrow stained casing and base that has been painted over once or twice. The north half has 1980s and 90s two-stories with builder base and casing that is now chipped and dated. Both come up for new trim, usually when new flooring goes in.
New flooring is the trigger because LVP and laminate sit at a different height than carpet. The old base ends up with a gap below it, or the shoe no longer covers the edge. Rather than add shoe to tired trim, many owners replace the base and door casing through the whole floor in one go.
We keep it practical: primed MDF or finger-jointed pine in a clean profile, coped inside corners, base scribed to the floor, everything filled and caulked. Crown in the living room is a common add. We installed in Brooklyn Park in August, and we take trim jobs in Champlin and Coon Rapids too.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-204-2099.
What you supply
- One photo per room and a close-up of the current base and a door casing
- Your flooring date, if the trim is going in after new floors
- The profile you like or a photo
- Paint color, or leave it primed
What JMB supplies
- Baseboard, shoe and casing in primed MDF or finger-jointed pine
- Removal and haul-away of the old trim
- Coped inside corners, glued outside miters, scribed base
- Crown in the living room when you want it
- Filled holes and caulked seams, ready for paint
- Painting when you want it, quoted as its own line
- Photos of the finished rooms in your job folder
How it is priced: per linear foot
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Linear feet of base and the number of door and window openings
- Profile size and material
- Removing old trim vs. new construction trim
- Crown in one or more rooms
- Floors or walls that need extra scribing
Send a photo of each room, a close-up of a corner, and tell us whether new flooring is going in and when.
How long it takes
Baseboard through one floor after new flooring: one to two days. Base and door casing through a rambler main floor: two to three days.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
Base after new flooring
Old base off before or after the floor goes in, new base scribed to the new floor.
Whole-floor trim swap
Base and door casing replaced through a rambler or a two-story main floor in one profile.
Living-room crown
Crown in the main room, coped at corners and run level.
Window casing refresh
New casing, stool and apron around windows, often after replacement windows.
Trim Carpenter in Brooklyn Park, MN: questions, answered
Should I replace baseboard before or after new flooring?
Pull the old base before the floor goes in and install new base after. The flooring installer gets a clean edge to work to, and the new base sits right on the new floor with no gap. If the base is already off, tell us the floor date and we schedule the trim after it.
Can you update the trim in a 1960s Brooklyn Park rambler?
Yes. Most rambler trim is narrow casing and short base, often painted over several times. We replace it with a taller base and wider casing in primed MDF or pine, room by room or the whole floor.
Is MDF trim a good choice to keep the cost down?
For painted trim in dry rooms, primed MDF is smooth, straight and the lower-cost option. In bathrooms and by the back door, finger-jointed pine or PVC holds up better, since MDF swells if it gets wet.
Do I need a permit for new trim in Brooklyn Park?
Replacing base, casing and crown is finish work. Framing changes or new wiring are a different matter; most cities require a permit for those, and we check with the City of Brooklyn Park building department.
Do you remove the old trim?
Yes. We pull the old base and casing, pull the nails, patch where needed and haul it away. Small dents in the drywall behind it are covered by the new trim.
How is trim work priced in Brooklyn Park?
Baseboard per linear foot, casing per opening, with a written quote by room. Send photos and we reply within one business day, or book a free in-home estimate.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Baseboard & Casing Installation
Straight lines, tight miters, and coped inside corners — baseboard and window & door casing installed room by room or across your whole home.
Read moreQuarter Round After LVP — Shoe Molding After New Flooring
The flooring crew left and there is a gap along every wall. We close it with shoe molding or quarter round, coped at the corners, so the floor looks finished.
Read moreCrown Molding Installation
Crisp corners, seamless joints, and profiles that fit your home — crown molding installed by a licensed Minnesota contractor who treats trim as a craft, not an afterthought.
Read moreInterior Door Installation in Brooklyn Park, MN
Bedroom doors that drift open, closet bifolds off the track, and a stack of new doors from the store waiting in the garage: Brooklyn Park door work, done plainly.
Read moreBoard and Batten & Paneled Wainscoting in St. Paul, MN
A Victorian dining room missing its paneling, a bungalow hall that wants a plate rail, or a postwar bedroom that needs one wall with some depth.
Read moreBoard and Batten & Wainscoting in East Bethel, MN
An East Bethel basement or entry finished by the owner often has straight walls and nothing on them. Board and batten finishes it, painted crisp or in rough pine to suit an acreage house.
Read morePage reviewed October 9, 2026 · JMB Builders LLC, MN license BC809005 · All carpentry by city pages
Where we work
Finish Carpentry by City near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: