Board and Batten Wall in Plymouth, MN
A mudroom wall that takes wet coats and boots, or an office wall that finally has some character, laid out to fit the room.
Reply within one business day. Or call / text 763-204-2099.
A board and batten wall in Plymouth, MN most often goes in a mudroom with a hook rail or on one wall of a home office, with wainscoting in a dining room. JMB Builders lays the battens out on the wall first, extends outlet boxes, uses PVC where the floor gets wet and leaves the work caulked, filled and primed, or in stain-grade wood to match older trim. Priced per wall; quote from photos or a free in-home estimate.
- Priced per wall
- PVC battens in wet mudrooms
- Paint-grade or stain-grade
In the 1990s and 2000s Plymouth two-stories, the mudroom off the garage takes a beating: wet boots, hockey bags, a dog. Board and batten to about two-thirds height with a deep cap and a hook rail protects the drywall and gives the coats a place to go. Below the cap we often use PVC or pine instead of MDF, since a wet MDF batten swells.
Offices are the other common room. One wall behind the desk gets full-height battens, or the whole room gets a lower wainscot with a cap. Everything is marked on the wall in tape so you see the spacing around the window and the door before we cut.
In older homes with stained trim, a painted batten wall can look out of place. There we build it in stain-grade wood, or use raised or flat panels with a stained cap that matches the casing. We do these walls in Golden Valley and Brooklyn Park too.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-204-2099.
What you supply
- The wall straight on, its length and ceiling height
- Whether it is a mudroom, office or dining room, and full-height or with a cap
- Hooks or knobs for a hook rail
- Paint or stain color
What JMB supplies
- Battens and cap in MDF, pine, PVC or stain-grade wood
- A hook rail or ledge built into the cap where wanted
- Outlet and switch box extenders
- Adhesive, finish nails, filler and caulk
- Panels or skim coat on heavy texture, as an option
- Painting or staining, quoted as its own line
- Photos of the finished wall in your job folder
How it is priced: per wall
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Wall size and full-height vs. cap-rail height
- Batten spacing and piece count
- PVC or stain-grade wood vs. MDF
- A hook rail or shelf in the cap
- Texture that needs a skim coat or panels
- Outlets, windows and doors in the wall
Photo of the wall straight on with a tape across it, the ceiling height, the texture close up, and the room it is in.
How long it takes
A mudroom wall with a hook rail: one to two days. An office feature wall: about a day. Stain-grade work adds finish time.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
Mudroom with hook rail
Battens to two-thirds height, a deep cap and hooks, in PVC or pine below the cap where it gets wet.
Office feature wall
Full-height battens behind the desk, spaced to center on the desk or window.
Stain-grade wainscot
Wood panels or battens with a stained cap matched to older casing.
Dining-room picture frame
Applied molding boxes under a chair rail, sized evenly to each wall.
Board and Batten Wall in Plymouth, MN: questions, answered
What is the best material for board and batten in a mudroom?
PVC or pine below the cap, because mudrooms get wet and MDF swells when it soaks up water. Above the splash zone MDF is fine and paints smooth. We leave every seam caulked and every nail hole filled.
Can board and batten be stained instead of painted?
Yes. In a Plymouth home with stained oak or birch trim we build it in stain-grade wood and finish it to match. It takes longer than paint-grade because the joints have to be tight without caulk.
Can you add hooks to a board-and-batten wall?
Yes. We build a deeper cap or a separate hook rail and lay out the battens so the hooks land on solid wood. Bring your hooks or we can supply them.
Do I need a permit for board and batten in Plymouth?
Applying trim to a wall is finish work. Moving an outlet or switch is done by a licensed electrician, and most cities require a permit for wiring changes; we check with the City of Plymouth building department.
How long does a board and batten wall take?
Most single walls take a day. A mudroom with a hook rail takes one to two days. A skim coat on heavy texture or a stained finish adds time.
How is a board and batten wall priced in Plymouth?
Per wall. Height, spacing, material, texture and the number of openings move the number. Send a photo with the length and ceiling height and we reply within one business day, or book a free in-home estimate.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Board-and-Batten Wall Installation
Even batten spacing, level cap rails, and layouts that land clean around outlets and windows — board-and-batten walls built to fit your room, not a template.
Read moreWainscoting & Picture-Frame Molding Installation
Board-and-batten entries, picture-frame dining rooms, statement accent walls — architectural wall trim designed for your space and installed with millwork-quality precision.
Read moreMudroom Bench Installation & Built-In Lockers — Site-Built
Backpacks on the floor, boots in a pile, coats on the two hooks by the door. A built-in bench with lockers gives every person in the house a spot and fits the wall exactly.
Read moreTrim Carpenter in Plymouth, MN
In Plymouth the trim is often good enough to keep. The job is making new pieces disappear into it, or taking a 1990s house up a step.
Read moreBoard and Batten & Paneled Wainscoting in St. Paul, MN
A Victorian dining room missing its paneling, a bungalow hall that wants a plate rail, or a postwar bedroom that needs one wall with some depth.
Read moreBoard and Batten & Wainscoting in East Bethel, MN
An East Bethel basement or entry finished by the owner often has straight walls and nothing on them. Board and batten finishes it, painted crisp or in rough pine to suit an acreage house.
Read morePage reviewed October 9, 2026 · JMB Builders LLC, MN license BC809005 · All carpentry by city pages
Where we work
Finish Carpentry by City near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: