Mobile Home Window Replacement — Manufactured Home Windows Set Right
The mobile home windows are drafty, fogged or will not latch, and the windows at the big-box store do not fit the openings.
Reply within one business day. Or call / text 763-250-3621.
Mobile home window replacement in Minnesota needs a mobile-home window made for that opening and wall, because manufactured home windows are a different size and construction than site-built windows. JMB Builders does it mostly across the north metro: Zimmerman, Elk River, Big Lake and Isanti. We check the order, pull the old unit, fix the opening and seal the new one. Priced per window.
- Priced per window, supplied or labor only
- Made-for-mobile-home units, not site-built
- Quote from photos, reply within one business day
Manufactured homes use windows built for manufactured homes. They are sized differently from site-built windows, and the walls are thinner. Most are held one of two ways: by clips or a clamp ring that squeezes the wall from inside and out, or by a flange screwed to the outside wall and covered with trim. A standard replacement window made for a stick-built house does not fit the opening or the wall depth without reframing.
So the first job is finding out what you have: the window size, the mounting type and the wall thickness. Mobile home windows are sold by mobile home supply stores, some lumberyards and online sellers, and we can check your order against your photos before you buy, or order for you. The wrong mounting type is the most common mistake.
On install day the old window comes out, the opening is checked for soft wall at the bottom corners, rot is repaired, and the new unit is set in sealant, fastened the way its maker says and trimmed. We work in parks and on private lots across the north metro and the rest of the Twin Cities.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-250-3621.
What you supply
- Photos of each window inside and out, and any label on the frame
- The size of each window or the listing you want to buy
- The windows if you already bought them; otherwise we order them
- Park approval if your park requires it for exterior changes
What JMB supplies
- A check of mounting type, size and wall depth against your order before you buy
- Removal and haul-away of the old windows
- Rot repair at the bottom of the opening, quoted first
- Butyl tape or sealant and fasteners as the window maker calls for
- Clips or clamp rings set, or flanges fastened and trimmed outside
- Interior trim reset or replaced
- Photos of each finished window in your job folder
How it is priced: per window
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Windows supplied by us vs. windows you bought
- Clip or clamp-ring mount vs. a flanged exterior mount
- Rot or soft wall at the opening
- Changing a window size or style
- How many windows in one visit
Send a photo of each window from inside and outside and a close-up of how the frame is held in.
How long it takes
Most mobile home windows go in quickly once the right units are here: several in a day. Rot repair at an opening adds time.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Mobile Home Window Replacement — Manufactured Home Windows Set Right: questions, answered
Can I put regular windows in a mobile home?
Not without reframing. Mobile home windows are a different size and construction than site-built windows, and the walls are thinner. A standard window needs a different opening and wall depth. The simple fix is a window made for manufactured homes.
Where do I buy mobile home replacement windows?
Mobile home supply stores, some lumberyards and online sellers carry them. Buy the same size and the same mounting type as the old window. Send us the listing and photos before you order and we check it, or we order the windows for you.
How do I know what type of mobile home window I have?
Look at how it is held in. If you see clips or a ring around the inside frame, it is a clamp-type window. If the inside has no clips and the outside has a flange screwed through it, it is a flanged window. A photo of each side tells us.
Do you replace mobile home windows in Zimmerman, Elk River and Big Lake?
Yes. We are based in Zimmerman and replace mobile home windows across Elk River, Big Lake, Isanti, Princeton and the rest of the north metro and Twin Cities.
What if the wall under my mobile home window is soft?
Water got in at the old window. The rotted wall at the bottom of the opening is cut out and rebuilt before the new window goes in, or the new one will leak and sag. We quote it from your photos.
Can you install mobile home windows I already bought?
Yes, labor only. We supply the sealant and fasteners and set them to the maker's instructions. If a window is the wrong size or mount, we tell you before the old one comes out.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Manufactured Home Exterior Door Replacement — 34x76 Doors and Storms
The mobile home door is drafty, the bottom is soft, and a regular door from the big-box aisle will not fit the opening.
Read moreInstall a Window You Bought Online — Labor-Only Window Installation
The window company wants to sell you their window. You already found yours online and just need it put in right: flashed, foamed, square, and trimmed by a crew that installs windows for a living.
Read moreVinyl Replacement Windows Installed — Measured, Set and Trimmed
Drafty old windows, fogged glass, sashes that stick. Vinyl is the most common replacement window in Minnesota, and the install is what makes it last.
Read moreWindow Leaking When It Rains — Leak Found, Flashing Fixed
Water on the stool after a storm, stains on the drywall under the window, or a drip from the head. We find the path and close it.
Read moreFoggy Window Glass Replacement — New Sealed Unit, Same Frame
Haze or water between the panes means the seal has failed. If the frame is still good, only the glass needs to go.
Read more1.5 Story Dormer Window Replacement — Upstairs Knee Wall Bedrooms
The upstairs windows in the dormers are drafty and hard to reach, and the bedrooms up there are the coldest rooms in the house.
Read morePage reviewed October 9, 2026 · JMB Builders LLC, MN license BC809005 · All windows pages
Where we work
Window Replacement & Installation near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: