Patio Door Replacement in Rogers, MN: Deck Sliders
The slider to the deck sticks, the latch barely catches and there is fog between the panes.
Reply within one business day. Or call / text 763-204-2099.
Patio door replacement in Rogers, MN, usually means retiring the builder-grade slider that came with a 2000s house: rollers worn, the latch sloppy, glass fogging. JMB Builders measures the opening, orders the door you pick, pulls the old unit, repairs any soft subfloor at the sill, sets the new door in a pan with flashing, and trims inside and out. Priced per door, quoted from photos or a free in-home estimate.
- Priced per door, door included
- Multi-point lock sliders on request
- Jamb width ordered to the wall
Rogers grew in waves from the late 1990s on, and the first of those houses are now past twenty years old. The patio door that came with them was usually a basic vinyl slider. By now the rollers have flattened, the track is worn, the single-point latch has loosened and the insulated glass has started to fog. Adjusting the rollers buys a season. Replacing the door fixes it.
Many of these homes have 2x6 exterior walls, so the jamb is deeper than on older houses. The new door has to be ordered with the right jamb width, or extended on site, so the interior casing lands flat. We measure that at the opening, not off the old order.
A lot of homeowners here ask for a slider with a multi-point lock, which pulls the panel tight at more than one spot. It locks better and seals better against wind. We can quote both, and you pick.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-204-2099.
What you supply
- Your door choice: frame material, color, glass and grilles, or we bring options
- Which panel slides, if you want it switched from the old door
- Photos of the door from inside and outside and the floor at the sill
- Casing paint color — painting is a separate quote line, or paint it yourself
What JMB supplies
- Measurement of the rough opening and wall depth, and the order for the new door
- Removal and haul-away of the old slider, screen and trim
- Repair of soft subfloor or rim at the sill, shown in photos and quoted
- Sill pan, flashing tape, low-expansion foam and exterior sealant
- Door set plumb and square, rollers, lock and screen adjusted
- Jamb extensions, interior casing and exterior trim to suit the siding
- Finished photos in your job folder
How it is priced: per door
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- The door: vinyl, fiberglass or clad wood, and the glass package
- Standard latch vs. a multi-point lock
- Jamb width for a 2x6 wall vs. a 2x4 wall
- Rot at the sill or rim once the old door is out
- Deck height and whether staging is needed outside
- Painting new casing, quoted as its own line
Photos of both sides of the door and a close-up of the floor at the track are enough to start.
How long it takes
A two-panel slider in a sound opening: most of one day. Sill repair adds time. The door is ordered after you approve the quote.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Patio Door Replacement in Rogers, MN: Deck Sliders: questions, answered
How do I know if my Rogers patio door needs replacing or just new rollers?
If the door glides once the rollers are adjusted or replaced and the glass is clear, keep it. If the track is worn down, the frame is out of square, the latch will not pull the panel tight, or there is fog between the panes, new rollers will not fix it. Send us photos and we will tell you which one it is.
What is a multi-point lock on a sliding patio door?
It is a lock that grabs the frame at two or more points along the edge of the panel instead of one hook in the middle. The panel is pulled tight against the weatherstrip along its length, so it locks more securely and leaks less air. Many sliders offer it as an option.
Do newer Rogers homes need a special patio door size?
The width and height usually match standard sizes, but many of these houses have 2x6 walls, which makes the jamb deeper. The door is ordered with the right jamb depth, or jamb extensions are added, so the inside trim sits flat. We measure the wall at the opening before ordering.
Can you check for rot under my patio door?
Yes, and we look as soon as the old door is out. A slider that leaked at the corners for years can leave the subfloor or rim board soft. We photograph it, show you, and replace the bad wood before the new door goes in; the repair is quoted from what we find.
Can I switch from a slider to a hinged patio door?
Often, yes. A hinged or French-style patio door can go in the same opening when the size works, but it swings into the room, so check the furniture space in front of it. We can quote both styles so you can compare.
Do you trim the outside of the patio door too?
Yes. Outside, the door is flashed into the wall and trimmed to suit the siding, usually vinyl or lap siding in Rogers. Inside, it gets jamb extensions where needed and casing; painting is quoted as a separate line, or leave it primed and caulked and paint it yourself.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Sliding Patio Door Replacement — Door Supplied, Set in a Pan, Trimmed
The slider drags, the glass fogs, and the floor inside the sill is dark. You pick the new door; we order it to fit, fix what is under the old one and set it so it glides.
Read moreWalkout Basement Door Replacement — Patio or Entry Door on a Slab
The walkout door is at grade, water from the patio runs toward it, and the carpet by the sill is damp. We replace the door and rebuild what it sits on so it stays dry.
Read moreReplace a Sliding Glass Door With French Doors — Full Conversion
You want both doors to open wide and a look that fits the room better than a slider. We check the opening, order a pair that fits it, and make the swap in a day or two.
Read moreRetractable Screen Door Installation — Entry and French Doors
You want a screen for summer air without a storm door hiding the front door. A retractable screen rolls into a slim housing beside the door and pulls across when you want it.
Read morePatio Door Replacement in St. Michael, MN: Deck and Walkout Doors
Drafty patio doors are one of the most common complaints in St. Michael's 1990s and 2000s houses, and a lot of them have two: one to the deck, one out of the walkout.
Read moreBasement Egress Window Installation in Maple Grove, MN
Your Maple Grove basement is finished or about to be, and the bedroom down there needs a window someone can climb out of.
Read morePage reviewed October 9, 2026 · JMB Builders LLC, MN license BC809005 · All by city pages
Where we work
Window & Door Services by City near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: