Entry Door Replacement in St. Cloud, MN — Prehung Units
Daylight under the door, frost on the deadbolt, a threshold that flexes underfoot.
Reply within one business day. Or call / text 763-204-2099.
Entry door replacement in St. Cloud, MN, with JMB Builders is a whole prehung unit: we measure the opening and wall depth, order a steel or fiberglass door with the glass and swing you want, tear out the old door and frame, rebuild a rotted threshold area, set the new unit on a sill pan with flashing, seal it, and trim it inside and out. Priced per door.
- Priced per door, frame and door together
- Threshold and subfloor rot rebuilt
- Photo quote or a free in-home estimate
St. Cloud's housing runs from century-old homes near downtown and the university to 1990s-and-newer houses on the south side, and front doors fail differently across that range. Older homes often have a heavy wood door in a frame that has moved over the decades, so it sticks in summer and gaps in winter. Newer homes usually have a steel builder door whose bottom edge has rusted and whose threshold sits on soft subfloor.
Harder central Minnesota winters find every gap. A door that lets light through at the corners or frosts at the lock is leaking at the weatherstrip, the threshold or both, and new weatherstrip only helps if the frame is still square. When it is not, the whole unit comes out.
We take the old door and frame out to the studs, cut back rot to sound wood, lay a sill pan, tape the sides and head, and set a new prehung door plumb, square and tight to its seals. Brickmould goes on outside and casing inside. We can paint or stain the door and trim as its own line on the quote, or it stays primed and caulked for you to paint.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-204-2099.
What you supply
- Door material, style, glass and color
- Swing direction and handle side
- Photos of the door from outside and inside and of the threshold up close
- Hardware choice, yours or ordered with the door
What JMB supplies
- Measuring the rough opening and wall depth, and ordering the unit
- Tear-out and haul-away of the old door, frame and trim
- Rebuild of rotted sill, jamb bottoms and subfloor
- Sill pan, flashing tape, low-expansion foam and sealant
- Door set plumb and square, threshold and strike adjusted to the seal
- Exterior brickmould and interior casing
- Lockset and deadbolt installed
- Finished photos in your job folder
How it is priced: per door
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Steel or fiberglass, and the glass insert
- Single door vs. sidelites or a transom
- Standard size vs. an older non-standard opening
- How much rot is under the old threshold
- Exterior finish around the door: siding, brick or stucco
- Painting or staining, quoted as its own line
Photos of both sides of the door, the threshold and jamb bottoms close up, and a measurement across the opening if you have a tape.
How long it takes
A single entry door: half a day to most of a day. Sidelites or rot repair add time. The door is ordered once the quote is approved, and the opening is closed up the same day.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Entry Door Replacement in St. Cloud, MN — Prehung Units: questions, answered
Why does my St. Cloud front door let in light at the corners?
The frame has moved out of square or the weatherstrip has flattened, so the door no longer meets its seal. On older homes the house itself has settled; on newer ones the hinge side may have sagged. If adjusting the hinges and strike does not close the gap, a new prehung unit is the fix.
Can a new front door fit my older St. Cloud home?
Yes. Older homes often have openings that are not a stock size. We either order a door to the opening or frame the opening to a stock size and trim it so the change does not show, and the quote says which one fits your house.
Is steel or fiberglass better for a St. Cloud entry door?
Both have an insulated foam core. Steel costs less but dents and can rust at the bottom edge. Fiberglass resists dents and rust and can take a stain, which suits a door that faces the weather.
Do I need a permit to replace my front door in St. Cloud?
Many cities treat a same-size swap as maintenance, but it depends on the job. We check with the City of St. Cloud building department and pull a permit when one is required, such as when the opening is changed.
Do you replace entry doors in Sauk Rapids and Sartell?
Yes. We replace entry doors in Sauk Rapids, Sartell and around St. Cloud from our base in Zimmerman, and we group trips up Highway 10 into full working days.
How do I get a quote for a new entry door in St. Cloud?
Photos of both faces of the door plus the threshold up close are enough to start, and you hear back within one business day. Or book a free in-home estimate and we measure the opening in person. The quote lists the door, the install and any rot repair separately.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Entry Door Replacement — New Door Supplied, Rot Fixed, Trimmed Out
The front door is drafty, the bottom of the frame is soft and the lock barely lines up. You pick the door; we measure, order it, and put it in on a dry, solid sill.
Read moreFront Door With Sidelights Replacement — Sidelites and Transom Units
An entry with sidelites and a transom is three or four pieces that have to act like one. Old unit out, sill rebuilt if it is soft, new unit set straight across the full width.
Read moreStorm Door Replacement and Installation — Storm Door Supplied
The old storm door sags, the closer is shot and the glass rattles. We measure, order the new one, fix the trim it hangs on, and leave it closing on its own.
Read moreHail Dented Steel Door Replacement — Entry and Storm Doors
The front door looks like a golf ball and the storm door took it worse. Here is when a new slab is enough, when the whole unit goes, and how the dents get documented.
Read moreBasement Egress Window Installation in Maple Grove, MN
Your Maple Grove basement is finished or about to be, and the bedroom down there needs a window someone can climb out of.
Read moreEgress Window Installation in Andover, MN
Your Andover basement is getting finished and the new bedroom needs a code-compliant way out. We cut it, set the window and well, and leave the room ready for drywall or trim.
Read morePage reviewed October 9, 2026 · JMB Builders LLC, MN license BC809005 · All by city pages
Where we work
Window & Door Services by City near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: