JMB Builders logo

JELD-WEN Sliding Door Installation, Labor Only — Patio Doors

The JELD-WEN patio door is leaning in the garage, still in the wrap, and the deck is on the other side of a slider that has not slid in years. We carry it in and set it in a day.

JELD-WEN sliding door installation is a labor-only job for JMB Builders across the Twin Cities metro. You buy the patio door at Home Depot, Lowe's or a lumberyard; we are an independent installer, not a JELD-WEN dealer. We confirm the handing and rough opening before delivery, pull the old slider, set a sill pan, level the frame, tape the fin, hang the panels and trim it. Priced per door, quoted from photos in one business day.

  • Priced per door, labor only
  • Vinyl, clad-wood and steel JELD-WEN sliders
  • Independent installer, not a JELD-WEN dealer
  • Licensed MN contractor BC809005
Sliding patio door opening onto a deck in a Minnesota living room during installation

JELD-WEN sliders are everywhere in the Twin Cities: the vinyl units on the rack at Home Depot and Lowe's, the clad-wood and steel units from a lumberyard millwork desk. The store will sell you one and deliver it, and then the install is your problem. We are an independent installer. We are not a JELD-WEN dealer, we do not sell the door, and questions about the product itself go back to the store. What we do is install patio doors, and a JELD-WEN slider in the wrap is a normal Tuesday.

A sliding door is a window that people walk through, and it fails at the bottom. The sill sits at floor level, collects rain and melt, and if there is no pan under it the subfloor rots quietly for years. So the order of work is fixed: old door out, subfloor checked, sill pan formed, frame set dead level so the panel rolls without drifting, fin nailed and taped, foam, trim. The panels and screen go in last and get adjusted at the rollers until the latch lines up.

Two things to get right before it ships: the handing (which panel slides, seen from outside) and the rough opening size, especially the height, because a patio door frame does not shim up the way a window does. Send a photo of your old slider from inside and out with a tape on it and we check both.

What you supply

  • The JELD-WEN sliding door: right width and height for the rough opening, right handing, with the screen
  • Handle set and any lock upgrade if you want something other than what ships in the box
  • Interior casing profile if it should match the rest of the room
  • Exterior trim or siding pieces if the new frame is a different size than the old one

What JMB supplies

  • A check of the order or the box label against your opening before delivery, no charge
  • Two people to carry the unit in and set it, plus removal and haul-away of the old door
  • Sill pan, flashing tape, shims, low-expansion foam, backer rod and exterior sealant
  • Subfloor and framing repair at the sill when we find rot, quoted first
  • Siding cut back and refit, or new exterior trim, around the fin
  • Interior jamb extensions and casing to close up the inside
  • Roller, latch and screen adjustment so the panel glides and locks
  • Photos of the finished door in your job folder
  • Painting the new casing as its own line, or leave it primed and paint it yourself

How it is priced: per door

Quoted in writing from your photos within one business day. What moves the number:

  • Standard two-panel slider vs. a three-panel or a wide unit that takes extra hands to set
  • Fin unit with the siding opened up vs. a replacement unit set into the old frame line
  • Rot at the sill or subfloor under the old door, which is common on sliders over a deck
  • Siding type around the opening: vinyl and lap siding vs. stucco or brick
  • Whether the rough opening has to be reframed for a different size door
  • Interior finish: casing and jamb extensions vs. a drywall return
  • A second door or a set of JELD-WEN windows in the same visit

Send a photo of the old door from inside and outside, a tape across the width and height of the frame, and the order printout or box label.

How long it takes

One JELD-WEN slider in a sound opening: most of a day. Add a few hours for sill rot or a stucco patch. JELD-WEN windows in the same trip: three to five a day.

How your project works

  1. 1

    Send photos, get a written quote

    Send three photos of the space and a sentence about what you want. You get a clear, itemized quote within one business day. We only come out to measure first when the job needs a tape measure — no pressure, no games.

  2. 2

    Pick materials, or bring your own

    We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.

  3. 3

    Clean, precise installation

    The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.

  4. 4

    Walkthrough and invoice

    We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.

Situations and options

Vinyl sliders from Home Depot or Lowe's

The stock two-panel units in the common widths and heights. Nailing fin outside, welded vinyl frame, screen included. Set level on a pan, fin taped, foamed and cased. The most common JELD-WEN door we install.

Clad-wood and steel patio doors

Lumberyard units with an aluminum-clad exterior and wood interior, or steel frames. Heavier, usually delivered by truck. Same pan and flashing, then the wood interior is finished with casing and stain or paint as its own line.

Three-panel and wide units

A slider with a fixed center and two operating panels, or one wide fixed panel and one slider. They need a level sill across the whole width or the panels drift, and a rough opening check before the order is placed.

JELD-WEN windows in the same visit

Plenty of homeowners buy the slider and the vinyl windows at the same time. We set both in one trip, priced per window on top of the door, and the second unit is always cheaper than the first.

JELD-WEN Sliding Door Installation, Labor Only — Patio Doors: questions, answered

Who installs JELD-WEN sliding patio doors I bought?

JMB Builders installs JELD-WEN patio doors homeowners have bought at Home Depot, Lowe's or a lumberyard, labor only, across the Twin Cities metro. We are an independent licensed Minnesota contractor, not a JELD-WEN dealer. You buy the door, we check it against your opening, remove the old slider, set the new one on a sill pan, flash it, hang the panels and trim it. Priced per door, quoted from photos within one business day.

How do I know which way a JELD-WEN slider should open?

Stand outside looking at the door. The handing describes which panel moves and which side it is on from that view. Most people keep the same handing as the old slider so the furniture and the light switch still make sense. The box and the order line say the handing; if you send us a photo of your old door from the outside we tell you what to order, no charge.

Does a JELD-WEN patio door need a sill pan?

Yes, every sliding door does. The sill sits at floor level and water gets under it from rain, melt off the deck and condensation. A pan, either a preformed one or a sloped pan built from flashing tape, catches that water and sends it back outside instead of into the subfloor. The pan is not in the box; we bring it, and we will not set a patio door without one.

Can you install a JELD-WEN slider where my old wood patio door was?

Yes, and it is the most common swap we do. Old wood sliders from the seventies and eighties are usually rotted at the sill and the bottom of the jambs, so plan on some framing repair, which we quote from photos before we start. The new vinyl or clad unit is often a slightly different size than the old frame, so we measure the rough opening, not the old door, before you order.

Do you also install JELD-WEN windows labor only?

Yes. The vinyl windows sold next to the sliders at Home Depot and Lowe's install the same way: fin nailed and taped over a pan, foamed, trimmed inside. We price them per window and usually set three to five in a day. If you bought the windows and the slider together, one visit handles both.

What should I check when the JELD-WEN door is delivered?

Before the driver leaves, look for a cracked or bowed frame, a chipped glass edge and the screen panel in the box. Check the label for the width, height and handing you ordered. Keep the unit upright, leaning against a wall, out of the sun, with the wrap on. On install day we open it and check it again before the old door comes out, so a damaged unit never leaves a hole in the wall.

Get a written quote for this job

Three photos and a sentence is enough. You hear back within one business day. Or text the photos to 763-204-2099.

Free quote from your photos in one business day · No obligation · Licensed contractor

Photos (up to 3 — the fastest way to a price)

One wide shot of the room or wall, one close-up of the trim or opening, one of anything you're unsure about.

Related jobs we do

Sliding Patio Door Installation, Labor Only — You Buy the Door

A new slider sitting in the garage and an old one that drags and leaks. We set it in a pan, square it, and make sure the screen and lock work before we pack up.

Read more

French Patio Door Installation, Labor Only — Hinged Patio Doors

A hinged patio door is two doors that have to meet in the middle, on a sill that takes every Minnesota storm. We set it plumb, panned and flashed so it locks smooth and stays dry.

Read more

ReliaBilt Door Installation — Lowe's Entry, Interior and Storm Doors

ReliaBilt is the door on the Lowe's rack in the size you need, today, at a price that makes the install the bigger question. We hang it right so the low price stays a good deal.

Read more

Mastercraft Door Installation, Labor Only — Menards Prehung Doors

The Mastercraft door came home on the rebate weekend and has been leaning in the garage since. We set it in a morning, with the pan and foam Menards did not sell you.

Read more

Install a Window You Bought Online — Labor-Only Window Installation

The window company wants to sell you their window. You already found yours online and just need it put in right: flashed, foamed, square, and trimmed by a crew that installs windows for a living.

Read more

Andersen 100 and 400 Series Window Installation, Labor Only

The Andersen order is at the store or stacked on your driveway and the store's install program is weeks out. We set each window the way the printed guide says, on a sill pan, and trim it out inside.

Read more

Page reviewed September 24, 2026 · JMB Builders LLC, MN license BC809005 · All install what you bought pages

Where we work

Install what you bought near you

Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: