Replace Several Windows to Match the Ones You Keep
Some of the windows are fine and staying. The new ones have to sit next to them without looking like a different house.
Reply within one business day. Or call / text 763-250-3621.
To replace several windows to match the ones you keep, JMB Builders notes the brand, frame color, grille pattern and interior finish of your existing windows at the measure, then orders the two to nine new ones in the closest current line. Matching a partial order is a normal job for us, priced per opening, mixed styles welcome. Twin Cities metro. Send photos and we reply within one business day, or book a free in-home estimate.
- A partial order is a normal job, priced per opening
- Brand, color, grilles and glass checked at the measure
- Differences shown to you before anything is ordered

Most window orders between two and nine are partial. Some of the windows were replaced by the last owner, or the front was done five years ago, or half the house is simply still good. The new windows will sit beside the old ones on the same wall, and the whole job is getting them to read as one set.
The match has five parts: the frame color, especially the shade of white; the width of the frame as seen from outside; the grille pattern and the width of the bars; the glass tint from the low-E coating; and the interior finish, painted or stained wood or white vinyl. At the measure we look at the windows you keep for all five, read any label on the frame or spacer bar, and pick the current line that comes closest.
Sometimes the same brand and line is still made and the match is nearly exact. Sometimes the old line is gone, and the closest current window has a slightly different white or a wider frame. We tell you which before anything is ordered, with the difference in plain words, so you decide whether it is close enough or whether another window on that wall should come along to keep the set together. Mixed styles on one order is normal, so a casement can match a double-hung in color and grilles.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-250-3621.
What you supply
- A photo of each window to be replaced from inside, labeled by room
- Close photos of a window you are keeping: the frame from outside, the grilles, and any label on the frame or spacer bar
- A photo of the wall where new and kept windows will sit side by side
- Clear access to each window the morning of the install
- Paint or stain color for new trim: painting is quoted as a separate line, or leave it primed and caulked and paint it yourself
What JMB supplies
- A line-item quote, each window priced per opening, with the matched line, color and grille pattern written on it
- One in-person measure with a match check of the windows you keep: color, frame width, grilles, glass and interior finish
- A plain list of any differences between the new line and the old before you sign
- All new windows on one order through our supplier so they match each other
- Removal, sill pan or flashing tape, shims, low-expansion foam and sealant at each opening
- Interior stops or casing and exterior capping or trim profiled to the windows you keep
- Cleanup, haul-away of the old units and photos in your job folder
How it is priced: per opening
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- How many windows are on the order and the size and style of each
- Whether the same brand and line is still made or a close match from another line is needed
- Frame color: standard white is simplest, a painted or dark exterior color is matched by sample
- Grille pattern and bar width, and whether the kept windows have grilles between the glass or on the surface
- Insert into sound frames or full frame, decided window by window
- Interior trim profiled to match the casing on the windows you keep
- Second-story windows that need a ladder set or roof brackets
A close photo of the frame corner outside and of any label inside the sash or on the spacer bar tells us the brand faster than anything.
How long it takes
Lead time depends on the matched line and is written on the quote. Two to nine inserts: one to two working days, every opening closed the day it is opened.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
Same line, still made
The brand and series beside the new windows are current. The order goes in with the same color, glass and grille code, and the new windows usually read as part of the original set.
Closest current line
The old line is gone. We pick the current window with the nearest frame width, white shade and grille bar, and show you where it differs before you order. Often the difference is only visible up close.
Match outside, change inside
The exterior color and grilles match the kept windows for the street, while the interior finish changes, such as white vinyl inside where the old ones were stained wood, if you are redoing the room.
Replace Several Windows to Match the Ones You Keep: questions, answered
Can new replacement windows match my existing windows?
Usually close, and JMB Builders checks it at the measure. We note the brand, frame color, grille pattern, glass tint and interior finish of the windows you keep and order the new ones in the closest current line. If the same line is still made, the match is nearly exact. If not, you see the differences before ordering. Send photos and we reply within one business day, or book a free in-home estimate.
How do I find out what brand my existing windows are?
Look for a label on the inside of the sash edge, a stamp on the hardware, or printing on the metal spacer bar between the panes of glass. A close photo of any of those usually tells us the brand and often the series. If there is nothing, the frame profile and hardware narrow it down at the measure.
Why do two white windows look like different whites?
Every manufacturer has its own white, and vinyl yellows a little with years of sun. A new white next to a ten-year-old white can read a shade brighter. We match the new white to the current shade of the kept windows as closely as the line allows and tell you if it will show.
Do the new windows have to be the same style as the ones I keep?
No. Mixed styles on one order is normal. What makes windows read as a set from the street is frame color, frame width and grille pattern, not whether the sash cranks or slides. A new casement in the same color and grilles sits fine next to an old double-hung.
Will the interior trim on the new windows match the old trim?
Yes, when you want it to. The casing profile, stool and apron on the kept windows are noted at the measure, and the new trim is run in the same profile and species, primed or stain-grade. Painting is quoted as a separate line, or leave it primed and caulked and paint it yourself.
What if the match is not close enough?
Then you decide before anything is ordered. Some owners add the one or two other windows on that wall to the order so the whole wall is new and matching, and leave the other walls for later. Others accept a small difference on a side wall nobody sees. The per-opening lines make either choice easy to price.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Replace Two Windows: a Pair That Matches
Two windows are failing, usually side by side or in the same room, and you want them replaced as a matched pair without being talked into the rest of the house.
Read moreReplace the Worst Windows First, the Rest Next Year
The whole house is not in the budget this year, and it does not need to be. The windows letting water in get done now; the ones that are only tired wait, measured and written down.
Read moreReplace Every Window on One Wall
One side of the house is the problem, or one side is getting new siding, or one side faces the neighbor's floodlight. Whatever the reason, that wall's windows make a clean order on their own.
Read moreMismatched Windows? Replace to Match — One Line, One Color, One Grille
Three owners, three window brands. The whites are different whites, the grilles do not line up and one side of the house looks like a different house.
Read moreReplace Just One Window — Single Window Replacement, Matched
One window is rotted, fogged past fixing or cracked, and the rest of the house is fine. You want that one replaced and matched, without being sold a whole house.
Read moreGrille Patterns for Replacement Windows — Colonial, Prairie, SDL, GBG
The order form asks for a grille pattern and a grille type, and getting either one wrong is permanent. This is how we help you fill in those two boxes.
Read morePage reviewed October 25, 2026 · JMB Builders LLC, MN license BC809005 · All windows pages
Where we work
Window Replacement & Installation near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: