Window Casing Repair After Blinds Removed — Holes Filled or Replaced
The blinds came down and every window has a row of screw holes, a chipped edge where the bracket was pried off, or a chunk of casing missing.
Reply within one business day. Or call / text 763-250-3621.
Window casing repair after blinds removed is a per-window job: the bracket screw holes get filled and sanded flush, split or chewed sections of casing get replaced, and the trim is primed so it is ready for paint. JMB Builders does it across the Twin Cities metro for homeowners getting a house ready to sell and for landlords at turnover, one window or every window in the unit. Priced per window, quoted from photos; reply within one business day.
- Priced per window; whole house or whole unit in one visit
- Holes filled flush, split casing replaced, primed
- Sale prep and rental turnover both welcome
Every set of blinds leaves a mark when it comes down. Inside-mount brackets leave two to four screw holes in the head jamb or the casing on each side. Outside-mount brackets leave holes in the face of the casing, and the bracket that was pried off instead of unscrewed takes a chip of wood with it. Plantation shutters are worse: a full frame screwed into the jamb on all four sides, sometimes twenty holes and a paint line where the frame sat. Add a dog that chewed the bottom of a casing leg, or a tenant who ripped the blinds down, and the trim is what every buyer or new tenant sees first.
There are two kinds of fix and the photos tell us which. Screw holes and small chips in paint-grade trim are filled with a hardening wood filler, sanded flush and spot-primed; done right they disappear under paint. Holes in stain-grade trim get a color-matched fill, which hides but never vanishes. A casing leg that is chewed, split along the grain, or has a hole bigger than a thumb is replaced: we cut the bad piece out at a joint, match the profile and put in a new piece. Replacing one leg is usually less than filling and sanding a wreck of one.
JMB Builders repairs window casing after blinds and shutters come down across the Twin Cities metro. For a house going on the market we do every window in a day or two and leave the trim primed for the painter, or paint it as a separate line. For a rental we do it as part of the turnover, with wood backing added where the next blinds will go so the next set of holes lands in something solid. Painting is quoted as a separate line, or leave it primed and paint it yourself.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-250-3621.
What you supply
- A photo of each damaged window with a close-up of the holes or the chewed section
- Paint-grade or stain-grade trim, and the species if stained
- Paint color if you want us to finish it; painting is quoted as a separate line, or paint it yourself
What JMB supplies
- Removal of leftover brackets, screws, anchors and shutter frames
- Hardening wood filler for screw holes and chips, sanded flush and spot-primed
- Color-matched fill on stain-grade trim, or replacement pieces in the same species
- Replacement casing, stool or apron in a matching profile where the damage is too big to fill
- Repair of drywall returns where the blinds were screwed into drywall and pulled out
- Wood backing at the head of drywall-return windows so the next blind brackets go into something solid
- Painting of the repaired trim when you want it done, quoted as its own line
- Photos of every window in your job folder for the listing or the turnover file
How it is priced: per window
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Screw holes only vs. chips and torn-out chunks that need shaping
- Paint-grade trim, which fills invisibly, vs. stain-grade, which usually means a replacement piece
- A casing leg, head or stool that has to be replaced instead of filled
- Shutter frames with many holes and a paint line vs. a pair of blind brackets
- Drywall returns that were screwed into and pulled out
- How many windows in the same visit; a whole house or unit is priced per window with the count
- Wood backing added at the head of drywall-return windows
Send one photo per damaged window with the holes in frame. Say whether the trim is painted or stained and the quote is firm.
How long it takes
Screw holes only: a whole house in a day, primed and ready for paint. Windows that need a replacement leg or stool: two to four a day. Painting adds drying time between coats.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
Screw holes and small chips
Two to six holes per window from inside- or outside-mount brackets. Filled with hardening wood filler, sanded flush, spot-primed. The fix for most of the windows in a house before listing.
Chewed or split casing leg
A dog, a pry bar or a tenant took a chunk out of the bottom of a leg. We cut the damaged length out, match the profile from stock or a piece from a closet, and splice or replace the whole leg so the joint is invisible under paint.
Shutter frames removed
A plantation shutter frame leaves a ring of holes on all four sides and a raised paint line where it sat. Holes filled, the paint line sanded feathered, the jamb and casing primed so a fresh coat reads flat.
Rental turnover, every window
All the windows in the unit in one visit, priced per window with the count, with wood backing added at the head so the next brackets stay put through the next tenant. Photos of each window for the turnover file.
Window Casing Repair After Blinds Removed — Holes Filled or Replaced: questions, answered
How do you fill screw holes in window trim so they do not show?
On painted trim the holes get a hardening wood filler, not caulk or lightweight spackle, which shrinks and dents. It is pressed in, left proud, sanded flush and spot-primed so the filler does not flash through the paint. Done that way the holes disappear under a coat of paint. Caulk in a screw hole sinks within a few weeks and leaves a dimple.
Can holes from blinds be hidden on stained wood trim?
Hidden, not erased. A color-matched wax or putty fill blends the hole into oak or maple at a glance, but a close look finds it. When there are a lot of holes or the trim is a light species, replacing the drilled piece in the same species and staining it to match looks better. We tell you which one fits from your photos.
Is it cheaper to fill the damage or replace the casing?
Holes and small chips are cheaper to fill. A leg that is chewed, split along its length, or has a hole you can put a thumb in is cheaper to replace than to rebuild with filler and sanding, and it looks better. Most houses are a mix: filled holes on most windows and one or two replacement pieces.
My blinds were screwed into the drywall return and pulled out. Can you fix that?
Yes. Drywall-return windows have no wood at the head, so brackets screwed into the drywall tear out and leave a crater. We patch the drywall, and if the blinds are going back up we add a wood strip or blocking at the head so the new brackets go into something solid. Cracked corner bead at the same window is fixed in the same visit.
Can you do every window in the house before we list it?
Yes. Screw-hole repair on every window in a typical house is a day, left primed for the painter or painted by us as a separate line. Send a photo of each window that has damage and a count of the ones that are fine, and the quote covers the house. We also do the doors and baseboard nicks on the same visit if you want the whole punch list handled.
Do you take down the old blinds and brackets too?
Yes. Leftover brackets, screws, plastic anchors and shutter frames come out first, unscrewed rather than pried so they do not take more wood with them. Anchors pulled from drywall leave holes that get patched with the rest of the repair. Hanging the new blinds is up to you or your blind installer.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Window Sill Trim — Stool and Apron Installation & Replacement
A window with no ledge, or a ledge that is split, swollen or painted into a lump — we install and replace window stools and aprons so there is a real sill to set things on.
Read moreCracked Drywall Return Window Repair: Corner Bead, Stains & More
A split corner, a chipped edge, a brown stain at the bottom of the return, or a window the drywaller never came back to finish — we fix it square and leave it ready for paint.
Read moreTurnover Punch List Carpentry — One Visit, Priced Per Item
The make-ready list has fourteen small carpentry items on it and the unit shows on Friday. We take the list, show up once with the parts, and send you photos and one invoice.
Read moreWindow Trim Water Damage Repair — Casing, Stool and Apron Replaced
The paint on the window trim is bubbling, the bottom of the casing has swelled into a lump, and there is a brown line on the apron. The leak is fixed or about to be. Now the trim needs to be replaced, not painted over.
Read moreBaseboard Repair for Rental Units — Splice, Section or Whole Unit
Chewed corners, kicked-off sections, baseboard swollen from a leak or missing behind where the fridge was — we splice, replace or swap it out on the turnover so the unit shows clean.
Read moreArched Window Trim — Casing and Jambs for Round Top Windows
The window company set the arch and stopped. The straight legs are easy; the curve is where most trim jobs fall apart, and it is the part you look at every day.
Read morePage reviewed October 9, 2026 · JMB Builders LLC, MN license BC809005 · All window trim pages
Where we work
Window Trim-Out & Drywall Returns near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: