Fiberglass Entry Door With Blinds Between the Glass
You want a glass front door for the light, and a way to close it off at night without a curtain hanging on the door.
Reply within one business day. Or call / text 763-250-3621.
A fiberglass entry door with blinds between the glass has a sealed glass unit with a blind inside it, raised and tilted by a slide on the frame, in a full-lite or half-lite fiberglass slab. Nothing to dust, nothing for a dog to bend. JMB Builders orders it with matching sidelites and installs it across the Twin Cities metro. Priced per door. Send photos and we reply within one business day, or book a free in-home estimate.
- Blinds sealed inside the glass, slide control on the frame
- Full-lite or half-lite fiberglass slab
- Sidelites with matching blinds
Blinds between the glass are a sealed glass unit with a slim aluminum blind inside the air space. A slide on the room side of the frame raises, lowers and tilts the slats through a magnet, so the glass stays sealed and the blind never gets touched. On an entry door that means a full-lite door that is a window by day and a solid-looking door at night, with no curtain, no cords and no blind rattling when the door closes.
On a fiberglass entry door the glass is built into the slab at the factory, so the blinds are chosen when the door is ordered, not added later. Full-lite gives the most light and the biggest blind; half-lite keeps a panel below for a door that gets kicked by boots and dogs. Sidelites are available with the same blinds and the same slide, so the whole entry closes off together. Slat colors are usually white and a soft tan or gray.
The install is a normal entry door replacement: the old door and frame out, the sill checked for rot, a sill pan and flashing, the prehung unit set and sealed, trim inside and out. The slide is checked at the walkthrough on the door and each sidelite.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-250-3621.
What you supply
- Photos of the current door from inside and outside, and a close-up of the sill
- Full-lite or half-lite, and whether the sidelites get blinds too
- Door finish: smooth for paint or woodgrain for stain, and the slat color
- Hardware finish, or your own handleset
What JMB supplies
- Measure of the opening, swing, jamb width and sill condition
- The prehung fiberglass door, ordered through ABC Supply with blinds-between-glass in the door and any sidelites
- Removal and haul-away of the old door and frame; rot at the sill or jamb feet repaired
- Sill pan, flashing tape, low-expansion foam, sealant and shims
- Brickmould or exterior trim and interior casing
- Lockset and deadbolt installed; blind slides checked on every lite
- Painting quoted as a separate line, or leave it primed and caulked
- Photos of the finished door in your job folder
How it is priced: per door
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Full-lite vs. half-lite: the larger glass unit with blinds costs more
- Blinds in the sidelites, each its own glass unit
- Smooth fiberglass with factory paint vs. woodgrain with factory stain vs. primed
- Rot at the sill or subfloor once the old door is out
- Siding type and exterior trim: brickmould, flat trim or capping
- Hardware: basic lockset vs. handleset, smart lock or multipoint
Tell us how many lites get blinds: door only, or door plus one or two sidelites. Each is a separate glass unit on the order.
How long it takes
One door in a sound opening: about a day on site. Doors with blinds between the glass are built to order; lead time runs with the line.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
Full-lite with blinds
Glass nearly the full height of the door, blind inside. Daylight in the entry with the slats open; a closed door at night with them shut.
Half-lite with blinds
Glass in the top half, a flat or raised panel below. Less glass to close off and a solid bottom for a door that takes a beating.
Door and sidelites with blinds
The same blind and slide in one or two sidelites, so the whole entry opens and closes together from inside.
Blinds in the door, privacy glass in the sidelites
Blinds where you want to look out, a fixed privacy texture in the sidelites where you do not. Cuts the number of blind units.
Fiberglass Entry Door With Blinds Between the Glass: questions, answered
Do fiberglass entry doors come with blinds inside the glass?
Yes. Several fiberglass entry lines offer a blinds-between-glass unit in a full-lite or half-lite door, built into the slab at the factory. The blind is sealed inside the insulated glass and worked by a slide on the frame. It is ordered with the door, not added after.
Can the sidelites have internal blinds too?
Yes. Sidelites are ordered with the same blind unit and slide as the door, so each one closes on its own. Many owners put blinds in the door and the sidelites; some put a fixed privacy glass in the sidelites instead and blinds only in the door.
Is the glass with internal blinds still Low-E?
Yes. The glass unit is an insulated unit with a Low-E coating and the blind in the air space between the panes. Because the blind takes up that space, the unit is a bit thicker than plain glass and the door is built around it. The door still carries the usual entry door energy ratings.
Can I get privacy glass instead of blinds on a front door?
Yes. A fixed obscure texture such as rain or satin blurs the view all the time with nothing to operate. Blinds between the glass give you both: clear glass when open, blocked when shut. The choice usually comes down to whether you want to see out the door.
How do you operate the blinds in an entry door?
A slide on the room-side frame of the glass moves a magnet that raises and lowers the blind; on most units the same slide or a second one tilts the slats. There are no cords. The slats, the ladder strings and the mechanism are all inside the sealed glass.
Is a fiberglass door with internal blinds a custom order?
Yes. The blind unit is built into the glass and the glass into the slab, so the door is made after the order goes in with your swing, jamb width, finish and sidelites. We give you the lead time with the quote.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Back Door With Built-In Mini Blinds
The kitchen door to the deck has a curtain on a tension rod that never hangs right. A door with the blind inside the glass fixes that for good.
Read morePatio Door With Blinds Between the Glass — Built-In Blinds, No Cords
Vertical blinds clattering in the track, cords the kids and pets get into, slats that need dusting. A patio door with blinds sealed inside the glass gets rid of all of it.
Read moreFiberglass Entry Door Replacement — Smooth or Woodgrain, Supplied
The wood door is checking and peeling, or the steel one is dented and rusting at the bottom. A fiberglass door holds up to sun and wet and can look like stained wood.
Read moreFull Lite vs Half Lite Entry Door — How Much Glass in a New Front Door
You know you want glass in the new front door. The question is how much, and the answer depends on what the door faces, what it opens into and who walks past it.
Read morePrivacy Glass Front Door — Light In, No View In, New Prehung Door
The front door opens straight into the living room, the entry is dark, and you do not want a clear window anyone can look through. Obscure glass in a new door solves both at once.
Read moreEntry Door With Venting Sidelites
The front entry gets no air in summer unless the door is standing open. Venting sidelites fix that: the glass beside the door opens, the screen keeps bugs out, and the door stays locked.
Read morePage reviewed October 27, 2026 · JMB Builders LLC, MN license BC809005 · All doors pages
Where we work
Door Replacement & Installation near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: