Skip to content
JMB Builders logo

Andersen 3000 Series Storm Door Installation

You want an Andersen storm door and you would rather have it measured, supplied and hung by the same people than carry a box home and find the brickmould is soft.

Reply within one business day. Or call / text 763-250-3621.

Andersen 3000 Series storm door installation puts in a mid-line Andersen storm door: an aluminum frame with an insulating core, full-view and ventilating versions, in a range of colors with matched handles, built to hang on the brickmould outside your entry door. JMB Builders measures, supplies the 3000 Series through ABC Supply, repairs the mould if needed, and hangs the door across the Twin Cities. Send photos and we reply within one business day, or book a free in-home estimate.

  • Priced per door, Andersen 3000 Series door included
  • Full-view and ventilating versions
  • Supplied through ABC Supply, hung on sound brickmould
Brick home front with a new arched grid picture window, flanking windows and the front entry door

Andersen's storm doors run in numbered series, and the 3000 Series sits in the middle: a sturdier frame than the entry-level doors, in both full-view versions, where one large glass panel shows the whole entry door, and ventilating versions with a built-in screen you can open to. Frames come in a range of colors, with handle sets in several finishes and a closer. The glass can be clear or Low-E.

A storm door is only as good as what it hangs on. The hinge rail screws through the brickmould into the wall framing, so the mould has to be solid, flat and wide enough for the rail. On many older Twin Cities entries the mould is soft at the bottom or has been capped in aluminum over rot. We check it at the measure and repair or replace it before the door goes on.

We measure between the brickmould, confirm the handing, order through ABC Supply, our supplier, where the Andersen storm door line is carried at Minnesota branches, and install: hinge rail plumb, top and latch rails fitted, the bottom expander cut to the sill, the door hung and the closer set so it latches on the first swing. We are the installer; options such as Andersen and Larson storm doors are hung the same way.

Get a written quote for this job

Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-250-3621.

Photos (optional)

Up to 3: one wide shot of the area, one close-up of the opening or trim, one of anything you're unsure about.

How do you want your quote?

Free, no obligation. Every quote is written and itemized, so you can compare it line by line.

What you supply

  • Photos of the entry door from outside, straight on and from the side showing the brickmould
  • Full-view or ventilating, frame color and handle finish
  • Hinge side: usually the same side as the entry door's hinges
  • Whether you want a keyed lock on the storm door handle

What JMB supplies

  • In-person measure of the opening between the brickmould and a check of its width and condition
  • The Andersen 3000 Series storm door, ordered through ABC Supply in your size, style, color and handle finish
  • Repair or replacement of soft or narrow brickmould before the door hangs
  • Hinge rail set plumb, top and latch rails fitted, bottom expander cut to the sill
  • Closer and wind chain mounted and set so the door latches on the first swing
  • Glass and screen checked for smooth operation
  • Photos of the finished door in your job folder

How it is priced: per door

Quoted in writing from your photos, with a reply within one business day. What moves the number:

  • Full-view vs. ventilating version
  • Frame color and handle finish, and a keyed lock
  • Brickmould that needs repair or replacement before the door hangs
  • An opening wider or taller than standard that needs a filler or a custom size
  • Clear vs. Low-E glass
  • Stucco or brick entries with no wood mould to mount to

Send a side photo of the brickmould and one straight on. If the mould is soft or narrow, the repair is its own line on the quote.

How long it takes

One Andersen 3000 Series storm door: a few hours once it arrives, or half a day with brickmould repair. Lead time depends on the order and is written on the quote.

How your project works

  1. 1

    Send photos, get a written quote

    Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.

  2. 2

    Pick materials, or bring your own

    We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.

  3. 3

    Clean, precise installation

    The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.

  4. 4

    Walkthrough and invoice

    We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.

Situations and options

Full-view 3000 Series

One large glass panel so the entry door shows through. The clean choice for a decorative glass or a freshly painted front door.

Ventilating 3000 Series

Glass panels that open to a built-in screen, so you can let air in without changing anything out. The practical choice for a door you use every day.

Storm door with a new entry door

If the entry door is being replaced, the 3000 Series goes on the new brickmould the same day, sized to the new opening, both doors on one quote.

Andersen 3000 Series Storm Door Installation: questions, answered

What is the difference between Andersen 3000 Series and 4000 Series storm doors?

The 4000 Series is Andersen's top line with a thicker frame and its own hardware and glass options; the 3000 Series is the mid-line door with a sturdier frame than the entry-level series and both full-view and ventilating versions. For most entries the 3000 Series does the job at a lower price. We can quote both.

Does the Andersen 3000 Series storm door come full-view?

Yes. The series includes full-view versions with one large glass panel, and ventilating versions with glass that opens to a built-in screen. You pick the version, frame color and handle finish when it is ordered.

What does an Andersen storm door mount to?

The brickmould around the entry door. The hinge rail screws through it into the framing, so the mould has to be solid and at least as wide as the rail. We check and repair it before hanging the door; a storm door on soft mould sags within a season.

Which side should the storm door hinge on?

Usually the same side as the entry door, so both swing together. A sidelite, railing or light fixture can push it to the other side. We decide at the measure and write it on the order.

Can you get Andersen storm doors through ABC Supply?

Yes. Andersen storm doors are on the Andersen list at Minnesota ABC Supply branches, which is where we order. We confirm the 3000 Series model, size and color with our branch before the quote is final. If you already bought an Andersen storm door, we hang it labor only.

How long does it take to install an Andersen storm door?

A few hours for the door itself once it is here, or about half a day when the brickmould has to be repaired or replaced first. The entry door stays in use the whole time.

Recent JMB work, from our job log

59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.

Related jobs we do

Page reviewed October 27, 2026 · JMB Builders LLC, MN license BC809005 · All doors pages

Where we work

Door Replacement & Installation near you

Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: