Remove TV Mount and Patch Holes in the Wall — Ready for Paint
Moving out, listing the house or turning a rental: the TV mount has to come off and the wall has to look like it was never there.
Reply within one business day. Or call / text 763-250-3621.
To remove a TV mount and patch the holes in the wall, the TV and bracket come down, lag and anchor holes are filled and sanded, in-wall cable plates are taken out and the openings closed or blanked, and the wall is primed. JMB Builders does it for homeowners, sellers and landlords across the Twin Cities metro. Painting is its own line. Priced per mount, quoted from photos, with a reply within one business day.
- Priced per mount removed and patched
- Lag, toggle and anchor holes filled
- In-wall cable ports closed or blanked
A TV mount leaves more behind than people expect: four to six lag holes, sometimes toggle bolt holes the size of a thumb where someone missed the studs, a pair of in-wall cable plates, and paint that has faded around the outline of the bracket. Spackle in the lag holes alone shows as dimples when the light hits the wall.
We take the TV and bracket down, back out the lags and anchors, and fill each hole in layers so it does not shrink. Big toggle holes get a backed patch. In-wall cable plates come out; the cable is pulled or coiled back into the wall and the opening is closed with a drywall patch or a blank plate. A plug-in style in-wall power kit is removed and its openings patched. If an electrician added a hardwired outlet behind the TV, it stays and gets a proper cover plate.
The wall is sanded, spot primed and left ready for paint, or painted as its own line if you have the color. Landlords and property managers can send several units at once and get them priced per mount.
Get a written quote for this job
Three photos and a sentence is enough: a reply within one business day, or ask for a free in-home estimate. Or text the photos to 763-250-3621.
What you supply
- Photos of the TV and mount on the wall, and of any cable plates or outlets behind it
- The paint can or color name if you want the patches painted
- Where the TV and mount go: stay in the room, go to the garage, or get hauled
- For rentals, unit numbers and access times
What JMB supplies
- TV lifted down and set where you want it, bracket and anchors removed
- Lag and anchor holes filled in layers and sanded flat
- Toggle holes and torn drywall patched with a backed patch
- In-wall cable plates removed, openings closed or covered with blank plates
- Spot primer over the patches, or painting of the wall as its own line
- Dust cleaned up and the old bracket hauled if you do not want it
How it is priced: per unit
Quoted in writing from your photos, with a reply within one business day. What moves the number:
- Number of mounts and how many holes each one left
- Toggle or anchor holes and torn drywall vs. clean lag holes
- In-wall cable plates and power kits to remove and patch
- Wall type: drywall, plaster, brick or stone
- Spot prime only vs. painting the whole wall so the patches disappear
- Several rooms or rental units in the same visit
Send a photo with the TV on the wall and one with it off if you can. That shows how many holes and plates there are.
How long it takes
Removing a mount and filling the holes takes about an hour; filler and primer need a second short visit or a longer day before paint.
How your project works
- 1
Send photos, get a written quote
Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.
- 2
Pick materials, or bring your own
We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.
- 3
Clean, precise installation
The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.
- 4
Walkthrough and invoice
We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.
Situations and options
Move-out or listing
Mount off, holes filled and primed, and the wall painted to match when you have the color. Done before the walkthrough or the listing photos.
Rental turnover
Tenant-installed mounts removed and patched per unit, with photos of each wall in the job folder for the deposit file. Priced per mount so the unit cost is clear.
Mount swap
Old mount off, holes patched, and a new mount lagged into the studs in a new spot for a bigger TV. The removal and the new mount are two lines on one quote.
Brick or stone fireplace
Sleeve anchors backed out and the holes filled with mortar-colored patch. The holes can be made much less visible, but not always invisible on brick.
Remove TV Mount and Patch Holes in the Wall — Ready for Paint: questions, answered
How do you patch holes after removing a TV mount?
Back out the lags and anchors, fill each hole with a setting or lightweight compound in two or three thin coats so it does not shrink, sand it flat, and spot prime it. Larger holes from toggle bolts or a missed stud get a backed patch first. The wall then needs paint, because patched spots show through the old finish even when they are flat.
What happens to the in-wall cable plates when the mount comes off?
They come out. Low-voltage cables are pulled out or coiled back in the wall, and the openings are either closed with a drywall patch or covered with a blank plate if the next owner may want a TV there. A plug-in style in-wall power kit is removed and patched. A hardwired outlet an electrician installed stays in place with a cover plate.
Should I remove the TV mount before I move out?
If the lease or the purchase agreement says the mount goes with you, or the wall has to be returned as it was, yes. Many buyers want the mount left. For rentals, check the lease: most landlords want the mount off and the holes patched and painted, and unpatched holes come out of the deposit.
Will the wall look new after the TV mount is removed?
After the holes are patched and the wall is painted, yes. The catch is fading: the paint behind a TV often looks different from the paint around it, so touching up only the patches can leave an outline. Painting the wall corner to corner hides it. Painting is its own line on the quote, or leave it primed and paint it yourself.
Can you remove a TV mount from a brick fireplace?
Yes. The sleeve anchors or masonry screws are backed out, and the holes are filled with a mortar or masonry patch colored as close as we can get. The patch blends from across the room; up close, holes in brick face are hard to make disappear completely.
Do you patch TV mount holes in rental units for landlords?
Yes, one unit or several. We price per mount, take photos of each wall before and after for the deposit file, and can paint the patched walls when you give us the color. Send the unit list and a photo of each mount.
Recent JMB work, from our job log
59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.
Related jobs we do
Drywall Repair — Holes, Cracks and Doorknob Dents Patched to Match
A doorknob through the wall, a crack that keeps opening over a door, a hole where the old TV mount was — patched, textured and primed so nobody can find it after paint.
Read moreMove-Out Damage Walkthrough — Photos and Itemized Repair Estimate
The tenant is out, the unit is rough, and you have a deposit to account for and a turnover to plan. One walk, one set of photos, one itemized list of what it costs to fix each thing, from someone who fixes them.
Read moreDuplex Turnover Repairs Between Tenants — For Small Landlords
The tenant is out, the next one moves in on the first, and the unit has holes in the walls, a door that will not latch and a closet door on the floor.
Read moreTV Mounting Service — TV Wall Mount Installation Into Studs
You bought the TV and maybe the mount; you want it on the wall, level, at the right height, and not coming down — that is a carpenter's job, and it takes us about an hour.
Read moreHide TV Wires in the Wall — In-Wall Cable Concealment
The TV is on the wall and the cables are hanging under it — we put them inside the wall with proper plates, and get power behind the TV the right way.
Read moreCorner TV Mount Installation — Full-Motion Arm in the Corner
The only wall that works is the corner over the dresser, the stud finder gives three answers on the plaster, and the TV needs to swing toward the bed — a mounting job that is mostly carpentry.
Read morePage reviewed October 1, 2026 · JMB Builders LLC, MN license BC809005 · All tv mounting pages
Where we work
TV Mounting near you
Based in Zimmerman, scheduling across the Twin Cities metro. Closest first: