Skip to content
JMB Builders logo

Hail-Damaged Vinyl Windows — Cracked Welds, Corners, Chalk Spots

The vinyl sliders look fine from the driveway. Send two sash bottom corners in low light with a coin.

Reply within one business day. Or call / text 763-250-3621.

Vinyl windows take hail damage as cracks and marks more than dents: a split at a welded sash corner, a crack in the frame, a glazing bead broken loose, or a whitened, chalky spot where a stone hit. JMB Builders checks every side of the house, photographs each crack with a coin for scale, and writes the scope as a new sash or a whole window, never a patch. Twin Cities metro, priced per opening.

  • Priced per opening
  • Every elevation checked, not just the storm side
  • MN Lic. BC809005
White sliding window with grids set in beige lap siding, seen from outside

Vinyl does not dent the way aluminum capping or steel does. It flexes, and when a stone hits hard enough it cracks or leaves a mark. That makes vinyl hail damage easy to miss. The places to look are the same on most vinyl windows: the welded corners of the sash and frame, the sill and the top of the frame, the thin glazing bead that holds the glass in, and the screen.

A vinyl sash is four pieces welded at the corners. A hit near a corner can open a hairline right along the weld, usually on the bottom rail where the stone lands. The frame can crack the same way at its corners or along the sill. The glazing bead is a snap-in strip around the glass; hail can split it or pop it loose. Where a stone hit flat, you often see a whitened or chalky spot, sometimes with a fine crack in the middle. Screens tear or the frames bend. Each of these is damage to the sash or frame. A cracked weld is not a part we glue or weld back.

Fiberglass and composite windows show up on north-metro houses too. They are stiffer than vinyl, so look for the same signs: cracks at corners and along the sill, chipped or crazed finish, split beads and torn screens. We check and document them the same way, window by window.

We are a contractor, not a public adjuster. We do not read your policy for you, tell you what it covers, or negotiate your claim. Ask your agent, your adjuster or an attorney. We inspect the windows and doors, photograph and document the damage, write an itemized estimate, and can be there when the adjuster looks at the house.

Send what you have: photos, the adjuster's estimate, your storm date

Send two sash bottom corners in low light with a coin. We reply within one business day. Or book a free in-home estimate.

Send what you have: photos, the adjuster's estimate, your storm date

Photos, or one PDF (inspection report, adjuster's estimate, window schedule) (optional)

Up to 3: one wide shot of the area, one close-up of the opening or trim, one of anything you're unsure about.

How do you want your quote?

Used for the written quote. We still reply by text if you picked Text.

How should we reply?
  • Send 2–3 photos and a sentence, or ask for a free in-home estimate.
  • We reply within one business day — by text or email, your choice.
  • You get a written, itemized quote, or we set a time to come out and measure.

We never pay, waive or rebate a deductible — Minnesota law forbids it.

How a quote works →

What you supply

  • Photos of two sash bottom corners per side, taken in low light with a coin next to the crack
  • The storm date and the claim number if you filed
  • The adjuster's scope or estimate if you have it
  • The window brand, or the label in the sash track or the etching on the glass
  • Access inside and out to every window, including the sheltered sides

What JMB supplies

  • A check of every window on every elevation: welded corners, frame, sill, glazing bead, screen
  • Close-up photos in low light with a coin for scale, labeled by window and elevation
  • A list of which windows show hail signs and which do not
  • An itemized estimate per opening: sash or whole window, screen, trim and labor
  • Being there when the adjuster looks at the house, if you want us there
  • New sash or whole window installed, sealed, and the screens put back

How it is priced: per opening

Quoted in writing from your photos, with a reply within one business day. What moves the number:

  • New sash in the old frame, or a whole window when the frame is cracked
  • Whether the maker still makes a sash that fits the old frame
  • Insert window in the old frame, or full-frame tear-out down to the rough opening
  • Window style and size: slider, double-hung, casement, picture or specialty shape
  • Grilles, glass type and tempered glass where a window is near a door, tub or floor
  • Second-story or walk-out access
  • Interior and exterior trim disturbed by a full-frame replacement
  • Screens and other hail damage on the same opening

Send two sash bottom corners in low light with a coin. We reply within one business day. Or book a free in-home estimate.

How long it takes

Inspection and photos: an hour or two for most houses. New sashes and windows are made to order, so the wait is the order. Once here, most openings take a few hours each.

How your project works

  1. 1

    Send photos, get a written quote

    Send three photos of the space and a sentence about what you want. You get a clear, itemized reply within one business day. Prefer a look in person? A free in-home estimate is always an option.

  2. 2

    Pick materials, or bring your own

    We help you choose profiles and materials that fit the house and the budget, or match your existing millwork exactly — or you buy the door or trim yourself and we install it. Everything is confirmed before the crew is scheduled.

  3. 3

    Clean, precise installation

    The crew shows up on time, protects floors and furniture, and installs with tight joints and consistent reveals. Photos of the finished work go in your job folder.

  4. 4

    Walkthrough and invoice

    We walk the finished work with you. If anything is not right, we fix it before we call the job done. Then one invoice, paid by check or direct deposit — no card fees, no payment links.

Situations and options

Cracked welded corner

A hairline that runs along the weld at a sash or frame corner, most often on the bottom rail. In low light it shows as a dark line. The sash or frame is broken there, so the fix is a new sash or a whole window.

Frame or sill crack

A crack in the frame, often on the sill or the top of the frame where hail lands. If the frame is cracked, a new sash does not fix it. The scope is a whole window: an insert in the old frame or a full-frame replacement.

Split or loose glazing bead

The snap-in strip that holds the glass in is split, chipped or popped out of its groove. It is part of the sash, and a broken bead means a damaged sash. We photograph it and write it as sash damage, not as a part to snap back in.

Chalky or whitened impact spots

Round white or chalky marks on the frame, sill or sash where a stone hit. Look for a fine crack in the middle. We photograph every spot with a coin next to it and note which windows have them and which do not.

Torn or bent screens

Torn mesh and bent screen frames on the same side as the cracks. They are easy to see, so they help show which sides the hail hit. Damaged screens go on the estimate with the window.

Fiberglass and composite windows

Stiffer frames that look a lot like vinyl from the yard. Check corners, sills and beads for cracks and the finish for chips. Replacement units come in options such as vinyl from MI, Silver Line, Ply Gem or ProVia, or a match to what you have.

What you do, what we do on a claim

Hail-Damaged Vinyl Windows — Cracked Welds, Corners, Chalk Spots: questions, answered

Does hail damage vinyl windows?

Yes. Vinyl does not dent much, so hail damage on vinyl windows shows up as cracks and marks instead. Look for a hairline at the welded corners of the sash, a crack in the frame or sill, a glazing bead that is split or popped loose, and white or chalky spots where a stone hit. Torn screens on the same side are another sign. The cracks are thin, so check in low light and get close. Photograph each one with a coin next to it.

Is a cracked vinyl corner cosmetic?

A crack through a weld is a break in the frame or sash, not a mark on the surface. The two pieces that were welded together are no longer one piece at that spot. Whether your policy treats it as covered damage is not our call. We are a contractor, not a public adjuster. We do not read your policy for you, tell you what it covers, or negotiate your claim. Ask your agent, your adjuster or an attorney. We photograph the crack and put it on the estimate.

Can a cracked vinyl sash be fixed?

A cracked weld or a split glazing bead means the sash is damaged. It gets replaced, either as a new sash in the old frame or as a whole new window. We do not weld, glue or patch vinyl, and we do not swap beads or glass to make a cracked sash look whole. If the maker still makes a sash that fits the frame and the frame is sound, a new sash is the scope. If the frame is cracked or the sash is not made, the whole window is replaced.

Why is the damage hard to see?

Vinyl bends under a hit and springs back, so there is often no dent to catch your eye. A crack along a weld can be thinner than a hair, and on a white frame in full sun it disappears. The chalky spots blend in with dust and pollen. Check early or late in the day, or shade the corner with your hand, and look at the bottom corners of each sash and along the sill. A coin next to the crack makes it show up in a photo.

Do vinyl windows on the sheltered side need checking?

Yes. Check every elevation. Wind-driven hail can hit any side of the house, not just the one that faced the storm on the radar. Sheltered sides, garage-side windows and basement windows can all take hits. Walk all the way around, look at the bottom sash corners and the sills on each window, and photograph what you find on each side, even if it is nothing. A side with no damage is worth a photo too, because it makes the record complete.

What photos show vinyl hail damage?

Close-ups of the two bottom corners of the sash, taken in low light with a coin next to the crack. Add one of any chalky spot with the coin beside it, one of the glazing bead along the bottom of the glass, and one of the screen. Then take a wide shot of the whole window and one of that side of the house, so each close-up can be matched to a window. Label the photos by side: front, back, left, right.

Recent JMB work, from our job log

59 installs recorded across 30 Twin Cities communities since Dec 2025. Window and door installs for homeowners and the builders we work with. Counts come straight from our job log; no customer names.

Related jobs we do

Page reviewed November 22, 2026 · JMB Builders LLC, MN license BC809005 · All insurance repairs pages

Where we work

Insurance & Storm Damage Repairs near you

Based in Zimmerman, scheduling across the Twin Cities metro. A few of the towns we cover: